18 inch Offset Spring Fork Assembly Chrome

Includes inner and outer springs front and rear legs offset outside mount rockers to utilize interchangeable wheel with lug bolt type drum studs and bushings spring rods with bushings. Some assembly may be required. These forks are replicas of the stock units with electric welded and brazed construction and will accept all original style components and accessories for the detailed replica look. Unit is unpolished at the rear fork stem cross plate and at the front spring fork rod forging. *NOTE: We measure from the top of the rear leg (tube) to the front axle center line.
Measurements: Length: 18 inches
Tech Notes: Suggested to use with #44-0581 Front Axle Kit. *NOTE: Must order shock ride control axle assembly top tree and bearing kit as required. How we measure Spring Forks. NOTE: Measurement is from the triple tree where stem and lower bearing sits to the axle position. This is the effective length as it is the legnth from the lower bearing cup on the frame to axle. Installer can slide a pipe or solid bar thru the bearing cups and measure the length that may be needed for the desired frame height. This Spring Fork assembly accepts a 3/4inch axle for custom applications. As rockers are not offset (as on replica Spring Forks). 1inch stem utilized tapered bearings for ease of installation.
Instructions: http://www.vtwinmfg.com/Instructions/49/49-2412.pdf