Frame Saver Gas Tank Mount Kit Temporarily clamp bracket in place and install one half of the tank to check placement on all applications. Bracket assembly can then be welded in place. Measurements: Tunnel Length: FITS Harley Davidson FL 1941...

Replica Sportster 2.4 Gallon Gas Tank High tunnel stock style tank features stock mounts and filler neck. Does not include vent tube. Accepts an early petcock and early gas cap. Please test fitment before painting. Tank weld seams may require...

W/G Gas Tank Parts Kit Raw steel must be welded on. FITS Harley Davidson G 1941 Harley Davidson G 1942 Harley Davidson G 1943 Harley Davidson G 1944 Harley Davidson G 1945 Harley Davidson G 1946 Harley Davidson G 1947...

XL 2 inch Stretch Gas Tank It is a smooth tank and has a screw type bung. The tank has a 2 inch stretch to the back of the tank for a more cleaner custom look. The stretch does not...

XL 2 inch Stretch Gas Tank This tank features a bolt in locking aircraft style gas cap and full rubber mount system for XL models. The back of the tank is stretched 2 inch and does not affect the mounts....

Replica Sportster 2.4 Gallon Gas Tank High tunnel stock style tank features stock mounts and filler neck. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the...

Replica Sportster 2.4 Gallon Gas Tank High tunnel stock style tank features stock mounts and filler neck. Includes vent tube accepts an early petcock and early gas cap. Please test fitment before painting. Tank weld seams may require filler to...

XL Bobbed 3.2 Gallon Gas Tank Tank accepts a two light three light cast type dash kit or FXS dual gauge configuration. Please test fitment before painting. Tank weld seams may require filler to meet your individual requirements. Do not...

Replica Sportster 2.4 Gallon Gas Tank High tunnel stock style tank features stock mounts and filler neck. It uses a 1975-up type petcock. Check the tank for flaws or fit before painting. Do not grind or sand the seams or...

Stretch Chopper 2.5 Gallon Gas Tank Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank...

Zinc Gas Tank Mounting Kit Kit includes special washers studs bolts and spacers in zinc finish for bobbed tanks. Measurements: Tunnel Length: FITS Harley Davidson FL 1941 Harley Davidson FL 1942 Harley Davidson FL 1943 Harley Davidson FL 1944 Harley...

Stretch Chopper 3.0 Gallon Gas Tank Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank...

Stretch Bobbed 5.5 Gallon Gas Tank Set The inchStretched inch rear section of the tank does hold gas and features seamless stretched portion. Check the tank for flaws and fit before painting. Do not grind or sand the seams or...

Stretch Chopper 3.8 Gallon Gas Tank Center to center measurement of mounting holes are 13-1/4 inch. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank....

Stock Replica Bobbed 5.1 Gallon Gas Tank Tank utilizes right and left bung caps is carburetor type and does not have provisions for installing an OE fuel gauge. It is suggested to pressure test and use a tank sealer. We...

Stock Replica Bobbed 5.1 Gallon Gas Tank EFI type tank does not have provisions for installing an OE fuel gauge. Requires sanding and primer prior to painting. Fuel line fitting should be masked or plugged during painting for easy installation...

Wyatt Gatling Stretch Touring 7.0 Gallon Gas Tank This stretched tank has steel construction with a curved bottom and dash. Includes hardware and rear mounting brackets. The use of the stock tank filler assembly is required. Requires a custom seat...

Stretch 7.0 Gallon Fat Bagger Gas Tank Features curved bottom and dash. Includes hardware and rear mounting brackets. The use of the stock tank filler assembly is required. Requires a custom seat to be fitted and accepts the stock OEM...

WR Half Mile Gas Tank Set Tank includes 2-1/2 gallon per side for gas only. Tank does not have provision for instrument dash panel or fuel shut off rod. Must use remote oil tank! 45 WR tanks use rubber fuel...

WR 45 inch 3 Gallon Gas Tank Set Does not accept reserve fuel shut off rod or instrument dash panel assemblies. Both sides are intended for gas but can be modified to use gas on the left and oil on...

WR 45 inch 2.0 Gallon Gas Tank Set Does not accept reserve fuel shut off rod or instrument dash panel assemblies. Both sides are intended for gas if oil tank is under seat ares but can be refitted to use...

WR 45 inch 2.5 Gallon Gas Tank Set Does not accept reserve fuel shut off rod or instrument dash panel assemblies. Both sides are intended for gas but can be refitted to use gas on the left and oil on...

Tourist Trophy Gas Tank Set with Brackets Top is smooth type without dash base cutout. Use for either 2 side of gas or 1 side oil on the right. The right side has two front 3/8 inch NPT and one...

Stock 5.1 Gallon Gas Tank Check the tank for flaws and fit before painting. The tank requires sanding and primer. Do not grind or sand the seams or joints. The fuel line fitting should be masked or plugged during painting...