Valve Spring Compressor - 18/24 mm Quick-release system presses straight against the retainer to eliminate side-loading the valve and keepers while not damaging or scratching valves, Works on all motorcycle, ATV, UTV, and small engine cylinder heads, Fully adjustable top...

Dowel Puller - 17 mm To be used in conjunction with Dowel Pin Puller Set (sold separately), Designed to assist in pulling stuck dowel pins from engine cases

Blind Bearing Remover with Slide Hammer - Kit Collets have an innovative design that improves durability and pulling strength, Collets are precision machined for perfect fit and durable performance, High quality blind bearing puller, Lifetime limited warranty, Kit includes:, High...

Wrench - Rocker Box Cover - 3/16" Designed to reach hard-to-get-at 3/16" hex screw on the rocker boxes of Big Twin, Sportster and Buell models, Vinyl cover offers comfort and minimizes chances of damage to finished surfaces, Features a 3/8"...

Timer - Water Cooled - 2-Stroke Kit includes a dial indicator with extensions and a 14 mm spark plug thread adapter, Designed to clear frame tubes on most recent water-cooled models, Allows inspection and adjustment of ignition timing, Gauge face...

Flywheel Puller - Internal Thread - M33 x 1.5 Laser etched with Motion Pro logo and part number, Used for removal of flywheel or rotor if applicable, Heat treated for strength and durability, Premium quality high carbon steel, Durable hot...

Compression Adjuster - Showa Forks - Short Provides easy adjustment of compression damping without tools, Designed to fit motorcycles with 49 mm Showa forks, Non-marring clamp-on design requires no modification of fork cap, Requires 12 mm handlebar clearance above top...

Spark Plug Socket - 18 mm Socket can be driven with various tools including the Motion Pro® spark plug ratchet wrench, 3/8" ratchet, 13/16" wrench, tool kit bar, or a Phillips screwdriver placed through the 8.5 mm hole at the...

Wrench - Ratchet Plug Designed to fit in limited space on many water-cooled 2-stroke engines, Ratchet mechanism works one way; turn over to reverse, Fits standard 13/16" plugs

Valve Shim Tool - Valve Adjuster - Honda Holds valve spring bucket down so adjusting shims can be removed, For adjusting valve clearance on twin cam models, Manufactured from hardened alloy steel

Valve Shim Tool - Valve Adjuster - Yamaha Holds valve spring bucket down so adjusting shims can be removed, For adjusting valve clearance on twin cam models, Manufactured from hardened alloy steel

Valve Shim Tool - Valve Adjuster - Kawasaki Holds valve spring bucket down so adjusting shims can be removed, For adjusting valve clearance on twin cam models, Manufactured from hardened alloy steel

Gear Jammer Originally developed for removing and installing the primary gear on a Honda CRF450R/X, Locks gears in place for easy installation and removal, Allows tightening of lock nuts to proper torque setting, Powerful magnet holds tool in place during...

Fork Alignment Will work on 27 mm-62 mm fork legs and tubes and on forks that are 140 mm to 220 mm (5.5" - 8.6") on center, Quick and easy-to-use tool for aligning front forks to ensure they are parallel...

Flywheel Puller - Internal Thread - M28 x 1.0 Laser etched with Motion Pro logo and part number, Used for removal of flywheel or rotor if applicable, Heat treated for strength and durability, Premium quality high carbon steel, Durable hot...

Flywheel Puller/Primary Gear Extractor Used for removal of the flywheel or rotor if applicable, Laser etched with Motion Pro logo and part number, Comes with 4 mm, 5 mm, 6 mm hardware, Heated treated for strength and durability, Premium quality...

Flywheel Puller - Internal Thread - M28 x 1.0 Used for removal of the flywheel or rotor if applicable, Laser etched with Motion Pro logo and part number, Heat treated for strength and durability, Premium quality high carbon steel, Durable...

Valve Stem Seal Tool - Installation - Set Set of 4 includes three common sizes for use on most modern street bikes, 4 mm, 4.5 mm & 5 mm and one additional 5 mm specially designed for the Suzuki, Hayabusa...

Flywheel Puller - Internal Thread with Protector - M26 x 1.0 Used for removal of the flywheel or rotor if applicable, Laser etched with Motion Pro logo and part number, Heat treated for strength and durability, Premium quality high carbon...

Crankshaft Puller 25 mm and 40 mm face plate adapters ensure the crankshaft is pulled perfectly straight into bearings, Precision tool used to install press-in crankshafts in an engine case, Time-saving method maintains crankshaft true during installation, Reversible pull stud...

Valve Spring Compressor - 24 mm Quick-release system presses straight against the retainer to eliminate side-loading the valve and keepers while not damaging or scratching valves, Works on all motorcycle, ATV, UTV, and small engine cylinder heads, Fully adjustable top...

Spark Plug Socket - Pro - 16 mm/5/8" Use with a 3/8" square drive or 17 mm wrench, Innovative internal plug retention system, Easy to read laser etched markings, Ultra-strong tool steel construction, Protective black oxide coating, Slim skeleton profile,...

Spark Plug Socket - Pro - 14 mm/9/16" Use with a 3/8" square drive or 17 mm wrench, Innovative internal plug retention system, Easy to read laser etched markings, Ultra-strong tool steel construction, Protective black oxide coating, Slim skeleton profile,...

Tester - Leakdown - 4-Stroke Accurately displays the total percentage of leakage past the rings, head gasket, intake and exhaust valves, Meets FAA leak down test specifications for cylinders below 5.00" (127 mm) bore diameter, Tests at 80, psi cylinder...