Valve Spring Compressor - 24/28 mm Quick-release system presses straight against the retainer to eliminate side-loading the valve and keepers while not damaging or scratching valves, Works on all motorcycle, ATV, UTV, and small engine cylinder heads, Fully adjustable top...

Compression Tester Tool Helps to quickly and easily inspect engine compression on both 2-stroke and 4-stroke engines, Redesigned and Improved billet gauge manifold with integrated pressure release valve, Easy to read precision 0-300 psi analog gauge with protective rubber boot,...

Tappet Adjuster Tool Set Integrated repositionable wrench handle holds the lock nut while the drivers are used to loosen or tighten the valve adjustment screw, 8 mm, 9 mm, and 10 mm lock nut sockets; and 3 mm square, 4...

Flywheel Puller - External Thread - M22 x 1.5 Used for removal of flywheel or rotor if applicable, Laser etched with Motion Pro logo and part number, Heat treated for strength and durability, Premium quality high carbon steel, Durable hot...

Pliers - Snap Ring Economical pliers easily work with both inside and outside opening snap rings or clips, Includes three extra sets of tips: one additional straight tip and two offset or angle tips

Carb Tool with Bits - 90° Includes five 1/4" hex drive bits (all 1/2" long) - Straight-slot, Phillips, D-shaped air/fuel mixture screw bit, 6 mm hex jet bit and 1/4"-hex-to-1/4"-drive bit, Detent action in handle with matching laser-etched index marks...

Degree Wheel - Engine Timing - Ignition/Cam Manufactured from 0.052" thick aluminum with a 6 mm center hole, Check or set ignition and/or cam timing

Adapter - Torque Wrench Properly torque 2-stroke cylinder base nuts and hard-to-reach fasteners, Extends the reach of any 3/8" drive torque wrench by 3", Check owner's manual for proper torque specifications, Fits 12 mm and 14 mm nuts and bolts,...

Belt Tension Gauge Designed to work with all belt drive models with a 10 lb specification, Graduated scale for easy reference, New L shaped pad fits all belt sizes, Compact design

Flywheel Puller - Internal Thread - M35 x 1.5 Laser etched with Motion Pro logo and part number, Used for removal of flywheel or rotor if applicable, Heat treated for strength and durability, Premium quality high carbon steel, Durable hot...

Wheel Bearing Remover - Split Collet - Metric - 10/12/15/17/20/25 mm - Set Eight-piece metric set includes large driver rod, small driver rod, and removers for 10 mm, 12 mm, 15 mm, 17 mm, 20 mm and 25 mm bearings,...

Flywheel Puller - External Thread - M14 x 1.5 Used for removal of the flywheel or rotor if applicable, Laser etched with Motion Pro logo and part number, Heat treated for strength and durability, Premium quality high carbon steel, Durable...

Spanner - Oil Filter/Clutch Hub Designed to fit oil filter and clutch hub on many Honda models (single- and twin-cylinder machines), Made of heat-treated steel, Inside diameter is 24 mm, Use with 3/8" driver

Flywheel Puller - External Thread - M27 x 1.0 Laser etched with Motion Pro logo and part number, Used for removal of flywheel or rotor if applicable, Heat treated for strength and durability, Premium quality high carbon steel, Durable hot...

Flywheel Puller - External Thread - M16 x 1.5 Used for removal of flywheel or rotor if applicable, Laser etched with Motion Pro logo and part number, Heat treated for strength and durability, Premium quality high carbon steel, Durable hot...

Leak Down Tester Designed to check for air leaks in 2-stroke engines, Includes air pressure gauge, pump-up bulb and fittings and adapters in 35 mm, 41 mm, 43 mm, or 46 mm intake manifolds sizes, Expandable rubber exhaust port plugs...

Side Case Puller - Harley-Davidson/Buell Includes bracket, puller bolt and set screws, Used to remove the right side-case cover, Made in the USA, Designed to work with '70 to '99 Big Twin models excluding '99 Twin Cam’s, '95-'02 Buell® models...

EZ Oil Drain System - CRF End caps protect threads and provide clean storage, Knurled grip and Buna O-ring for tool-free sealing, CNC-machined 6061-T6 aluminum adapter body, Quick, simple, no-mess solution to oil changes, Ergonomic start/stop clamp, High-temp silicone hose,...

Piston Pin Puller Tool Use in conjunction with our clutch bushing installation tool kit to make clutch rebuilding quicker and easier, Easily removes all sizes of piston pins (12 to 20 mm) without any damage to pistons, Includes 2 different...

Plug Timing Hole - Clear - Long Plastic plug locates the timing mark without getting an eye full of oil

Wrench - Oil Filter 74 mm ID / 15 flute design - compatable with stepped S&S oil filters, Stamped steel construction with a durable black finish, 3/8” square drive, Will also fit Drag oil filter # 0712-0648.

Ring Gear Lock Tool Choose the appropriate side of the tool for kit; one side is for open belt drives up to 06 models and the smaller, reverse side is for open belt drive kits for 07-16 models, For use...

Tap and Die - Metric - 40-Piece 40-piece set includes taps and dies along with correct tap and die wrenches, screwdriver for die wrench, pitch gauge, thread-drill size chart and durable plastic case, Works great for cutting new threads as...

Flywheel Puller - Polaris Flywheel puller designed for specific ATV models