20 inch Inline Spring Fork Assembly Black +2 inch

Includes inner and outer springs front and rear legs 1 inch inline stem and offset outside mount rockers to utilize interchangeable wheel with lug bolt type drum and mechanical front brake drum studs and bushings spring rods with bushings. The bottom lower bearing to the center of the axle measures 22 inch. Some assembly may be required. These forks are replicas of the stock units with electric welded and brazed construction and will accept all original style components and accessories for the detailed replica look. Top clamp neck races and cone nut are not included. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in higher shipping costs. *NOTE: We measure from the top of the rear leg (tube) to the front axle center line. *NOTE: We measure from the top of the rear leg (tube) to the front axle center line.
Measurements: Length: 20 inches
Tech Notes: Suggested to use #24-0150 springer fork cone nut. *NOTE: Must order shock ride control axle assembly top tree and bearing kit as required. How we measure Spring Forks. NOTE: Measurement is from the triple tree where stem and lower bearing sits to the axle position. This is the effective length as it is the legnth from the lower bearing cup on the frame to axle. Installer can slide a pipe or solid bar thru the bearing cups and measure the length that may be needed for the desired frame height. This Spring Fork assembly accepts a 3/4inch axle for custom applications. As rockers are not offset (as on replica Spring Forks). 1inch stem utilized tapered bearings for ease of installation. The distance from the 1st hole to the 3rd hole at the very bottom of the fork measures 3-7/8inch center to center.
Instructions: http://www.vtwinmfg.com/Instructions/49/49-2408.pdf