Replica Retro Rigid Straight Leg Frame
This retro rigid frame can be fitted with a Panhead Shovelhead Evolution Knucklehead or Twin Cam engine with a 4-speed or 5-speed transmission. Frame has a 30 rake +2 inch raised neck and will accept a 230 rear tire with chain drive or 200 rear tire with belt or chain drive. This frame will accept a 3/4 inch rear axle stock plunger seat post and transmission mount plate. The tin inner primary must be utilized when using a Shovelhead Evolution or TC-88 engine. This frame is an exact replica of the original style but is updated to accept flat side tanks all Big Twin engines and 4-speed or 5-speed transmissions. This frame is set up for disc brake and uses a 1987-later style rear caliper.
Tech Notes: When using a chain drive with a 230 tire the use of #17-085 9 a 1inch offset plate and a #19-0105 sprocket is required. When using a belt or chain drive with a 200 tire the use of #17-0860 a 3/4inch offset plate and a #19-0104 sprocket is required. When using a Shovelhead Evolution or Twin Cam engine it is required to use a #42-0617 tin inner primary. When using with a TC-88 engine order #51-0625 rear frame mount adapter plate In some instances it may be necessary to ream or file holes slightly in order to assemble parts onto the frame. Use #31-0475 Front Engine Mount Spacer to accept 1936-1947 Knucklehead or Flathead engines in 1948-up frames. When using the #42-0617 tin inner primary the use of #19-05 70 is needed if using a #17-0859 transmission plate 1inch offse t and a #19-0105 sprocket. When using the #42-0617 tin inner primary the use of #19-05 69 is needed if using a #17-0860 transmission plate 3/4inch offset and a #19-0104 sprocket. Suggested to use with #44-1942 axle. *NOTE: There are no serial numbers stamped on the replica frame. V-Twin supplys a Bill of Sale only referencing the part number.
OCPPARTSWAREHOUSE is not responsible for late deliveries outside of our control. Severe weather, carrier issues, pandemics, natural disasters, etc.
Orders over $75.00 qualify for free shipping.
Orders under $75.00pay a flat shipping rate of $10.95 Offer only applies to 48 contiguous states. Hazardous Materials ship UPS Ground only.
Orders that contain backorders, the order will be held until all parts are in. A customer representative will reach out to you if this is the case. At that time a decision can be made whether or not to split the order.
Alaska orders will be charged a flat $35 charge and will be shipped Post Office Priority Mail. We do not ship Oversized mail to Alaska.
Hawaii orders will be charged a flat $35 charge and will be shipped Post Office Priority Mail. We do not ship Oversized mail to Hawaii.
Puerto Rico orders will be charged a flat $35 charge and will be shipped Post Office Priority Mail. We do not ship Oversized mail to Puerto Rico.
