Police Solo Seat Kit *NOTE: 2008-up seat inchT inch mounts to 2 cap screws that secure the top of the rear frame bars. Front of the plate mounts to the rear of the tank with existing mount holes uses (2)...

Rear Seat Lick and Stick Pillion Pad Attaches to rear fender with multiple suction cups without damage to paint or fender. Measurements: Height: 2-3/8 inches

Rear Seat Pillion Pad Smooth Style The mount hole width center to center measures 3-1/2 inch and the mount hole length center to center measures 9-3/8 inch. The tallest on the padded area measures 8-1/2 inch height on the mount...

Rear Seat Pillion Tuck and Roll Pad Has brass grommets installed to accept a 1/4 inch screw for mounting. Measurements: Rear Pad Thickness: 2-1/2 inches

Replica Black Leather Deluxe Solo Seat without Skirt The seat is constructed by using genuine drum dyed leather covered with a molded 2 inch foam pad on an accurate steel formed and ribbed baseplate with brackets riveted in place. Authentic...

Replica Black Leather Solo Seat This seat features foam 1-1/2 inch thick. Seat has rear bolt holes 6-5/8 inch center to center for custom mount kits. Mount holes are 5/16-24 National Fine thread. Front has slotted track as OE. Measurements:...

Replica Black Leather Solo Seat Base plate is steel vented type with holes. Accepts T bar type mounting systems which must be ordered separately. Order mount hardware separately. Measurements: Rear Width: 16 inches Instructions: http://www.vtwinmfg.com/Instructions/47/47-0431.pdf FITS Harley Davidson EL 1936...

Replica Brown Leather Army Solo Seat It accepts stock inchT inch bar mounting systems. Order mount hardware kit separately. These replica seats measure over 3/8 inch thick and are approximately 13/32 inch at the edge seam. Steel formed ribbed baseplate...

Replica Shock Absorber Compressor Tool Replica shock absorber compressor tool simplifies shock absorber disassembly or assembly by holding the spring in compression while disassembling parts. Tech Notes: Suggested to use #16-1847 bolt.

Replica Swingarm Frame Raw This XLH frame will accept all XL type engines 1983-up oil tank and bearing kit. Use 1986-up wheel and related caliper components. Manufacturer's Statement of Origin is supplied for the frame. **NOTE: All frames are shipped...

Replica Troxel Solo Saddle Formed Leather Brown Die stamped with the Troxel eagle logo as original. Spring assembly and mounts features a black finish. For use on early models with the Indian Harley Davidson piece. Restoration quality! Generally used on...

Replica Troxel Solo Saddle Formed Leather Honey Brown Spring assembly and mounts features a black finish. Restoration quality! *NOTE: Does not have the Troxel wing logo stamped as original. Generally used on 1914-1917 models for a lower seating position. *NOTE:...

Replica Troxel Solo Seat Brown Die stamped with the Troxel wing logo as original. Spring assembly and mounts features a black finish. Generally used on 1907-1913 models for a higher seating position. *NOTE: Brown leather Troxel saddles are assembled with...

Rigid Frame Solo Seat and Mount Kit Kit includes black solo seat chrome 3 inch hair pin springs cross bar with spring dowels and 1 inch clamp set to mount to fender cross bar. Measurements: Rear Width: 13 inches Instructions:...

Rigid Solo Seat and Mount Kit Steel baseplate has two bolt holes 6-3/8 inch center to center to accept mount kits which must be ordered separately. All custom rigid frames for Sportser and Big Twins with modifications may require extra...

Sissy Bar Pad Black Sissy bar pad measures 7-1/2 inch x 9 inch. Measurements: Bolt Distance Width: 2-5/8 inches

Sissy Bar Pad Kit The length from top to bottom measures 6 inch the width at the narrow end is 3-1/2 inch and the width at the wide end is 5 inch. Measurements: Wide End Width: 5 inches

Slim Passenger Pillion Pad Kit includes mounting hardware and grab strap. *NOTE: Installation requires the separate purchase of the passenger footpegs and the footpeg mounting kit. Measurements: Width: 6-1/2 inches FITS Harley Davidson FLS 2012 Harley Davidson FLS 2013 Harley...

Smooth Black Pointed Sissy Bar Pad Order chrome upper bracket set separately. Measurements: Thickness: 3 inches Tech Notes: Suggested to use with #31-1987 bracket for sissy bar pad

Smooth Short Sissy Bar Backrest Includes chrome mount bracket. Measurements: Height: 1-1/4 inches Tech Notes: Suggested to use with #50-0819 8-3/4inch Shorty Sissy Bar Upright.

Smooth Vinyl Rear Seat Pillion Pad Use with 2 metric M6 X 1.0 screws. Measurements: Pad Thickness: 2 inches

Smoothie Saddle Seat Black Naugahyde Order rear seat tab assembly. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in higher shipping costs. Measurements: Driver Width: 13 inches...

Smoothie Saddle Seat Black Naugahyde Order rear seat tab assembly. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in higher shipping costs. Measurements: Passenger Width: 7 inches...

Solo Seat *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in higher shipping costs. Measurements: Thickness Overall: 2-5/8 inches Instructions: http://www.vtwinmfg.com/Instructions/47/47-0910.pdf FITS Harley Davidson FXDWG 1996 Harley...