7 Tooth Speedometer Drive Gear The inner diameter measures 55.58mm. Measurements: Inner Diameter: 55.58mm Instructions: http://www.vtwinmfg.com/Instructions/17/17-9160.pdf FITS Harley Davidson EL 1937 Harley Davidson EL 1938 Harley Davidson EL 1939 Harley Davidson EL 1940 Harley Davidson FL 1941 Harley Davidson FL...

7/8 inch Fork Stem Die Tool Fork stem die tool is used for repairing or dressing 7/8 inch x 24 TPI on fork stems. Measurements: Outer Diameter: 1-3/4 inches FITS Harley Davidson Fx 1971 Harley Davidson Fx 1972 Harley Davidson...

74 inch Overhead Valve 3-7/16 inch Piston Set .030 Oversize **Note: Run engine at moderate speeds for at least 500 miles avoiding excessive running in lower gears in order to properly break-in new pistons and rings. FITS Harley Davidson FL...

74 inch Overhead Valve 3-7/16 inch Piston Set .060 Oversize **Note: Run engine at moderate speeds for at least 500 miles avoiding excessive running in lower gears in order to properly break-in new pistons and rings. FITS Harley Davidson FL...

74 inch Overhead Valve 3-7/16 inch Piston Set .070 Oversize **Note: Run engine at moderate speeds for at least 500 miles avoiding excessive running in lower gears in order to properly break-in new pistons and rings. FITS Harley Davidson FL...

74 inch Overhead Valve 3-7/16 inch Piston Set Standard Size **Note: Run engine at moderate speeds for at least 500 miles avoiding excessive running in lower gears in order to properly break-in new pistons and rings. Bore size is 3.4380...

74 inch Overhead Valve Flywheel Assembly Shipped assembled and trued with shafts. Features a cast Sifton flywheel. Sprocket shaft is correct length to use with 1965-69 FL transmission with a mid length mainshaft. FITS Harley Davidson FL 1965 Harley Davidson...

74 inch Panhead Cylinder and Piston Kit They are ready to run and will require break-in. Please refer to proper shop manual for suggestions on break-in. Sold in pairs for stock stroke only. For 1948-1965 Panhead models. Order base and...

74 inch Shovelhead Cylinder and Piston Kit They are ready to run and will require break-in. Please refer to proper shop manual for suggestions on break-in. Sold in pairs. For stock stroke only. For 1966-1978 Shovelheads. order gasket set separately....

74 inch Side Valve Cylinder Set Order valves and springs separately. Cylinders are 13 fin style that has the valve guides and intake manifold nipples installed. *NOTE: Valve guides must be reamed to size. Cylinders need to be final honed...

74 inch UL Front and Rear Cylinder Kit Order valves springs and covers separately. *NOTE: Includes standard valve guides installed. FITS Harley Davidson UL 1937 Harley Davidson UL 1938 Harley Davidson UL 1939 Harley Davidson UL 1940 Harley Davidson UL...

8 Gauge Spoke Wrench Tool Each end of wrench fits 6.2 and 6.4 size spokes.

80 inch Overhead Valve Flywheel Assembly Special 80 inch flywheel assembly is used for generator case sets only. This assembly features a thick side sprocket shaft side flywheel and narrow pinion side flywheel and replaceable pinion & sprocket shafts. FITS...

80 inch Shovelhead Cylinder Piston Kit Set of two. For stock stroke only. They are ready to run and will require break-in. Please refer to proper shop manual for suggestions on break-in. For 1979-1985 Shovelheads. Order head base gasket separately....

80 inch ULH Front and Rear Cylinder Kit Standard size fitted. Ready to install. Cylinders feature casting hallmarks around the base. *NOTE: Must order valves springs and covers separately. **NOTE: Includes standard valve guides installed. Measurements: Weight: 56.2 lbs Tech...

80 inch ULH Side Valve Cylinder Set Order springs and valves separately. Cylinders are 13 fin style that has the valve guides and intake manifold nipples installed. *NOTE: Valve guides must be reamed to size. Cylinders need to be final...

88 inch Evolution Standard Piston Kit Fits Evolution motors and includes wrist pins lock tabs. Features a 3.625 inch bore size. **Note: Run engine at moderate speeds for at least 500 miles avoiding excessive running in lower gears in order...

900cc Cylinder and Piston Kit They are ready to run and will require break in as suggested in the appropriate shop manual. For stock stroke. Order gasket set separately. Instructions: http://www.vtwinmfg.com/Instructions/MS/Piston Fitment.pdf FITS Harley Davidson XL 1957 Harley Davidson XL...

93.4 inch Evolution Cylinder Kit Black Order top end gasket kit separately. Outer Diameter at the bottom of the cylinder is 98.38MM. *NOTE: Cases must be bored to accept kit. *NOTE: Will work with stock stroke Evolution flywheels. Measurements: Outer...

93.4 inch Evolution Cylinder Kit Silver Cylinder sleeve has an outer diameter of 3.8765 inch. Order top end gasket kit separately. Measurements: Cylinder Size: 3.7410 Tech Notes: Case boring is required Instructions: http://www.vtwinmfg.com/Instructions/MS/Piston Fitment.pdf FITS Harley Davidson FLST 1986 Harley...

95 inch Big Bore Twin Cam Cylinder and Piston Kit No crankcase machining required for installation. Does not require flywheel re-balancing. Twin Cam 3-7/8 inch Big Bore Cylinder Kit increases displacement of Twin Cam 88 (1450) to 95 (1550) cubic...

95 inch Big Bore Twin Cam Cylinder and Piston Kit 95 inch Big Bore kit will increase TC-88 engines to 95 inch. Kit includes silver cylinders with 9.3:1 cast moly coated pistons with rings that are pre fitted to cylinders...

Acu-Time Device Tool Acu-time device tool locks advance mechanisms for accurate static timing. Instructions are included. Instructions: http://www.vtwinmfg.com/Instructions/16/16-0161.pdf FITS Harley Davidson FL 1970 Harley Davidson FL 1971 Harley Davidson FL 1972 Harley Davidson FL 1973 Harley Davidson FL 1974 Harley...

Adapter Screw Adapter screws fits 1991-up XL Tech Notes: Use with clutch compresor tool on 1991-UP XL. Instructions: http://www.vtwinmfg.com/Instructions/16/16-1514.pdf