Jims 4th Gear Countershaft Jims 4th gear countershaft for 5-speed stock ratio FITS Harley Davidson FLST 1986 Harley Davidson FLST 1987 Harley Davidson FLST 1988 Harley Davidson FLST 1989 Harley Davidson FLST 1990 Harley Davidson FLST 1991 Harley Davidson FLST...

Jims Alternator Rotor Puller Big Twin *NOTE: For use on any 1997-2006 Big Twin models with a 45 amp high output charging system. Instructions: http://www.vtwinmfg.com/Instructions/16/16-1054.pdf FITS Harley Davidson FLT 1997 Harley Davidson FLT 1998 Harley Davidson FLT 1999 Harley Davidson...

Jims Balancer Retainer Tool Hydraulic tensioners are used to keep constant chain tension on the counter balancer system. Without the use of these retaining tools you will not be able to remove or install the balancing system. Use on all...

Jims Brake Caliper Piston Remover Tool This tool prevents any damage to the pistons and the piston bores so seals and wipers can be replaced. Instructions: http://www.vtwinmfg.com/Instructions/16/16-0541.pdf FITS Harley Davidson FLST 2000 Harley Davidson FLST 2001 Harley Davidson FLST 2002...

Jims Breather Ream Tool Using this tool will repair damaged breather hole to use a .030 oversize breather gear and repair a bad breather hole. Tech Notes: All holes in breather bore will need to be cleared of all chips....

Jims Bushing Remover/Installer Tool Jims bushing remover/installer tool will help remove and install bushings in cam support plate on TC-88 models. FITS Harley Davidson FLST 1999 Harley Davidson FLST 2000 Harley Davidson FLST 2001 Harley Davidson FLST 2002 Harley Davidson...

Jims Cam Bearing and Bushing Alignment Tool Any binding of this tool indicates misalignment of cam cover and bushing. When building an engine this is a must have. Instructions: http://www.vtwinmfg.com/Instructions/16/16-0671.pdf FITS Harley Davidson FL 1970 Harley Davidson FL 1971 Harley...

Jims Cam Bearing Installer Tool Jims cam bearing installer tool presses the inner cam bearings smoothly into the right case with the bearings installed to the proper depth. Instructions: http://www.vtwinmfg.com/Instructions/16/16-0660.pdf FITS Harley Davidson FL 1958 Harley Davidson FL 1959 Harley...

Jims Cam Bearing Puller Tool The Jims cam bearing puller tool is used to remove the bearing from the crankshaft and is designed to do this with no slipping or binding. Instructions: http://www.vtwinmfg.com/Instructions/16/16-1280.pdf FITS Harley Davidson FLST 1999 Harley Davidson...

Jims Cam Cover Bushing Remover Tool This tool is sturdy reliable and in 1 easy operation it will remove the cam cover bushing or cam bushing. Instructions: http://www.vtwinmfg.com/Instructions/16/16-0669.pdf FITS Harley Davidson EL 1936 Harley Davidson EL 1937 Harley Davidson EL...

Jims Cam Gear Alignment Tool This alignment tool is designed to index the cam gears position while removing on installing the cam gear. You will be able to accurately position the cam gear from one camshaft to another. Instructions: http://www.vtwinmfg.com/Instructions/16/16-1282.pdf...

Jims Cam Gear Remover Tool The tool acts as a stable base to keep the camshaft perpendicular to the press. FITS Harley Davidson FL 1970 Harley Davidson FL 1971 Harley Davidson FL 1972 Harley Davidson FL 1973 Harley Davidson FL...

Jims Cam Locking Tool The cam locking tool allows the removal and torquing of cam sprocket bolts by locking camshaft and camshaft sprockets. FITS Harley Davidson FLST 2007 Harley Davidson FLST 2008 Harley Davidson FLST 2009 Harley Davidson FLST 2010...

Jims Cam Locking Wedge Tool Jims cam locking wedge tool will lock the gear teeth on the TC-88 model engine. Instructions included. Instructions: http://www.vtwinmfg.com/Instructions/16/16-0790.pdf FITS Harley Davidson FLST 1999 Harley Davidson FLST 2000 Harley Davidson FLST 2001 Harley Davidson FLST...

Jims Cam Shaft Remover and Installer Tool Tool is used in conjunction with cam chain tensioner unloader. Tech Notes: Suggested to use with #16-0793 cam chain tensioner unloader Instructions: http://www.vtwinmfg.com/Instructions/16/16-0792.pdf FITS Harley Davidson FLST 1999 Harley Davidson FLST 2000 Harley...

Jims Case Bearing Conversion Tool This tool includes one bearing insert held under .002 inch TIR (total indicator reading) bearing is manufactured from aerospace quality steel that is several times stronger than the aluminum case material that the standard bearing...

Jims Case Splitter Tool This tool bolts to the primary mounting holes with supplied hardware. Hand thread in pushing screw. The flywheels will be pushed from the left case. Instructions: http://www.vtwinmfg.com/Instructions/16/16-1354.pdf FITS Harley Davidson FLST 2007 Harley Davidson FLST 2008...

Jims Castle Nut Socket 2017-up Softail models requires the castle nut to secure and compress the fork spring. This one piece solid steel socket is designed to secure the joint rod prior to final assembly. Instructions: http://www.vtwinmfg.com/Instructions/16/16-1061.pdf FITS Harley Davidson...

Jims Center Case Bolt Oversize Required when any Twin Cam case cylinder spigot hole is enlarged for Big Bore cylinders. Tech Notes: Suggested to use with #16-0381 case bolt tool. FITS Harley Davidson FLST 1999 Harley Davidson FLST 2000 Harley...

Jims Clutch Adjusting Tool Includes wrench and correct hex key. FITS Harley Davidson FLST 1986 Harley Davidson FLST 1987 Harley Davidson FLST 1988 Harley Davidson FLST 1989 Harley Davidson FLST 1990 Harley Davidson FLST 1991 Harley Davidson FLST 1992 Harley...

Jims Clutch Compressor Tool The Jims compressor tool features access windows to ease the removal and installation of the snap ring. Instructions: http://www.vtwinmfg.com/Instructions/16/16-1805.pdf FITS Harley Davidson FLST 1990 Harley Davidson FLST 1991 Harley Davidson FLST 1992 Harley Davidson FLST 1993...

Jims Clutch Gear Puller Tool Jims 4 speed clutch gear puller tool is designed to remove the starter clutch gear without damage to the gear or shaft. FITS Harley Davidson EL 1936 Harley Davidson EL 1937 Harley Davidson EL 1938...

Jims Compensator Bolt Torx Socket Jims compensator bolt torx socket is for 2014-up Big Twins. Used to remove or install the compensator bolt. FITS Harley Davidson FLST 2014 Harley Davidson FLST 2015 Harley Davidson FLST 2016 Harley Davidson FLST 2017...

Jims Compensator Lock Nut Kit Similar to the bulletproof transmission pulley mega nut this lock kit is so that the compensator nut will not come loose and cause unnecessary unsafe and expensive damage. *NOTE: For use with 34 Tooth Compensaotr...