Front Fender Raw With Bracket For use on 19 inch and 21 inch tires only. We suggest pre-fitting all fenders prior to painting. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual...

Replica Front Fender Raw without Brackets This fender is smooth type except for the side rivet holes for the stock mount brackets. For use on 16 inch wheel and 41mm wide style for assemblies. We suggest pre fitting the fender...

Replica Front Fender Raw Steel We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hinge and brackets will have to be tweaked for final...

Front Fender Narrow Chrome Fender is for use on 35mm or 39mm forks with a 19 inch wheel. We suggest pre fitting the fender prior to painting. The spacing between mount holes is 2-5/8 inch center to center. Before priming...

Replica Raw Front Fender Brackets are correct for 1958-1984 and will fit 1949-1984. Fender is for 41mm wide style glide fork assembly and 16 inch wheels. This fender is without trim holes for fender tip spears or bumper. Before priming...

Front Fender Glide Type Raw Fender is for use with 19 inch and 21 inch tires only. The mounting holes measure 2-3/4 inch center to center. We suggest pre fitting the fender prior to painting. *Note: UPS may consider this...

Front Fender Narrow Primer For use on 19 inch or 21 inch tires only. Fender brace mount measure 3 inch center to center. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hinge...

Front Fender Early Raw We suggest pre fitting the fender prior to painting. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in higher shipping costs. Measurements: Width:...

Front Fender Narrow Raw Fender fits 35mm and 39mm forks with a 19 inch wheel. We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets...

Replica Front Fender Raw We suggest pre fitting the fender prior to painting. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in higher shipping costs. FITS Harley...

Replica Front Fender Raw with Trim Hole Fenders fit 41mm wide style glide forks with 16 inch wheel. Fender is equipped with trim holes in the front for fender tip. Before priming or painting fit the fender body braces and...

45 inch WL Rear Fender Fender is fully assembled and riveted together with hinge. *NOTE: Features 5/8 inch braces installed. Before finishing with primer or paint installer must prepare fender by checking alignment of fender tail and bracket. Alignment will...

Replica Front Fender Raw Brackets are not included. Fender fits 41mm wide style glide forks with 16 inch wheel. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hinge and brackets will have...

Rigid Rear Fender Assembled Fender comes with a 7/8 inch wide bracket and does not have a tail lamp hole. Tail lamp hole may be cut as required. Before finishing with primer or paint installer must prepare fender by checking...

Spring Fork Front Fender Fender braces fit on the outside of the offset rockers. Fender is not pre-drilled. We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces and mounting points in...

Rear Fender with Flare End Fender does not have a tail lamp hole. We suggest pre fitting the fender prior to painting. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight...

Replica Rear Fender with Tail Lamp Hole Fender is equipped with wiring clips which are located under the left side of the fender. We suggest pre fitting the fender prior to painting. *Note: UPS may consider this part as packaged...

Replica Rear Fender with Tail Lamp Hole We suggest pre fitting the fender prior to painting. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in higher shipping...

Rear Fender without Tail Lamp Hole Fender is not equipped with a tail lamp hole. We suggest pre fitting the fender prior to painting. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the...

Replica Rear Fender Steel Measures 6-3/8 inch wide with a length of 29 inch. We suggest pre fitting fender prior to painting. *NOTE: The fender will require some body work and tweaking for proper fit to fender struts and to...

Rear Fender Bobbed Raw Steel Fender is not equipped with a tail lamp hole. We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hinge...

Rear Fender Bobbed with Right Cutout Does not include bracket. We suggest pre fitting the fender prior to painting. Constructed with 1.50mm thick gauge steel. *NOTE: UPS may consider this part as packaged inchoversize inch for shipment as compared to...

Rear Fender Bobbed with Left Cutout Fender measures 7-1/4 inch wide and 5-1/2 inch deep and does not include bracket. We suggest pre fitting the fender prior to painting. *Note: UPS may consider this part as packaged inchoversize inch for...

Rear Fender Flat Raw Unfinished Length of the fender with the curve is 41-7/8 inch long with the length between the tips of the fender being 29-5/8 inch. Fender may require trimming and finishing for chain relief. We suggest pre...