Replica Rear Fender with Hinged Tail Fender uses late 1973-up large style tail lamp. This fender is not equipped with signal indents. We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces...

Front Fender Fat Kid Steel For use on a 16 inch wheel Glide forks. We suggest pre fitting the fender prior to painting. The distance from bolt hole to bolt hole at the mounting flange center to center measures 2-3/4...

Replica Rear Fender Raw For use with custom tail lamp. Tail lamp hole must be cut out. Fender is not equipped with indents for signals. We suggest pre fitting the fender prior to painting. *Note: UPS may consider this part...

Replica Rear Fender Raw The width of the fender is 7-1/2 inch. We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hinge and brackets...

Universal Front and Rear Fender For use on 16 inch wheels and is without brackets. We suggest pre fitting the fender prior to painting. Side edgers have a reinforce rolled bead. Rear end is beaded. Undrilled without brackets. Measurements: Overall...

Military Rear Fender Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hinge and brackets will have to be tweaked for final fitment. Patience is required for proper installation! *Note: UPS may consider...

Military Front Fender Hole closest to the front of fender measures 1-7/8 inch center to center and 18-3/4 inch from front the fender. Center hole measures 4-3/16 inch center to center and 25-1/2 inch from front of the fender. Before...

Spring Fork Front Fender For use on models with 3/8 inch axle and rockers inside the Spring Fork for the 1/2 inch brake drum style wheel. Before priming or painting fit the fender body braces and mounting points in place....

Replica Rear Fender Raw Fender uses late 1973-up large style tail lamp. We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hinge and brackets...

Front Fender Spring Fork Raw Fender is without brackets. We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hinge and brackets will have to...

Rear Fender Bobbed Raw Fender is without reflector indents. We suggest pre fitting the fender prior to painting. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in...

XL Bobbed Rear Fender Kit We suggest pre fitting fender prior to painting. Order chrome struts and covers separately. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result...

Front Fender Raw Steel Brackets are riveted in place. Does not come with a cable bracket. We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces and mounting points in place. Fender...

XL Bobbed Rear Fender Only Includes the mud guard. *NOTE: Must order tail lamp bracket license plate and hardware separately. *NOTE: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will...

Rear Fender Kit Bobbed We suggest pre fitting fender prior to painting. Order sissy bar components separately. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in higher...

Rear Fender Kit Bobbed We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hinge and brackets will have to be tweaked for final fitment....

Rear Fender Bobbed Steel Will not fit stock fender struts. Fender may require trimming and finishing for chain relief. We suggest pre fitting the fendor prior to painting. Note: All fenders are shipped raw. Fenders have tooling marks on the...

Front Fender Spring Fork Style Raw We suggest pre fitting the fender prior to painting. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in higher shipping costs....

Rear Fender Kit Bobbed We suggest pre fitting fender prior to painting. Order chrome struts and covers separately. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in...

Replica Front Fender Lamp with Glass Lens 12 Volt NOTE: Inside of glass lens is frosted as original! Order wire kit separately. *NOTE: Steel mount base has brass terminal block in center for wire connection. *NOTE: Lamp includes studs for...

Rear Fender Bobbed Raw For use with a 200 tire. Fender is without reflector indents. We suggest pre fitting the fender prior to painting. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the...

FLT Rear Fender 8 inch Smooth May require some modification. We suggest pre-fitting the fender prior to painting. Installation requires drilling of holes. Will mount to FXR FXD and XL models where a 8 inch wide fender will fit. Before...

Inner Fender Strut Set Inner fender strut set bolts to frame to secure fender. Tech Notes: Suggested to use with #50-0887 Rear Fender Strut Cover Set Chrome. FITS Harley Davidson FLSTF 2008 Harley Davidson FLSTF 2009 Harley Davidson FLSTF 2010...

Rear Fender Strut Set Chrome Sold as a set of 2. Tech Notes: Suggested to use with #50-0865 Fender Inner Strut Set Raw. FITS Harley Davidson FLSTF 2008 Harley Davidson FLSTF 2009 Harley Davidson FLSTF 2010 Harley Davidson FLSTF 2011...