Indian Larry Front Fender Lamp *NOTE: Is actually an Indian design front fender lamp but Indian Larry says put in a red lens and use as a tail lamp. *NOTE: Larry asked us to build these years ago late 1990's....

Spring Fork Front Fender Fender is for use on models with rockers on the inside of the spring forks. It does not have a fender lamp hole. The fender measures 7-5/8 inch wide at middle of fender. We suggest pre...

Raw Spring Fork Front Fender Fender braces fit on the outside of the offset rockers. We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets...

Replica Spring Fork Front Fender Raw Fender braces fit on the outside of the offset rockers. We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces and mounting points in place. Fender...

Rear Fender Kit Bobbed with Cateye Tail Lamp We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hinge and brackets will have to be...

Replica Front Fender Glide Style Raw We suggest pre fitting the fender prior to painting. There is one wire clip inside the fender. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual...

Front Fender Spring Fork Fender does not include brackets and may require further preparation. We suggest pre fitting the fender prior to painting. Order bolts separately. Before priming or painting fit the fender body and mounting points in place. Fender...

Replica Rear Fender with Hinged Tail Fender uses late 1973-up large style tail lamp. This fender is not equipped with signal indents. We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces...

Front Fender Fat Kid Steel For use on a 16 inch wheel Glide forks. We suggest pre fitting the fender prior to painting. The distance from bolt hole to bolt hole at the mounting flange center to center measures 2-3/4...

Replica Rear Fender Raw For use with custom tail lamp. Tail lamp hole must be cut out. Fender is not equipped with indents for signals. We suggest pre fitting the fender prior to painting. *Note: UPS may consider this part...

Replica Rear Fender Raw The width of the fender is 7-1/2 inch. We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hinge and brackets...

Universal Front and Rear Fender For use on 16 inch wheels and is without brackets. We suggest pre fitting the fender prior to painting. Side edgers have a reinforce rolled bead. Rear end is beaded. Undrilled without brackets. Measurements: Overall...

Military Rear Fender Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hinge and brackets will have to be tweaked for final fitment. Patience is required for proper installation! *Note: UPS may consider...

Military Front Fender Hole closest to the front of fender measures 1-7/8 inch center to center and 18-3/4 inch from front the fender. Center hole measures 4-3/16 inch center to center and 25-1/2 inch from front of the fender. Before...

Spring Fork Front Fender For use on models with 3/8 inch axle and rockers inside the Spring Fork for the 1/2 inch brake drum style wheel. Before priming or painting fit the fender body braces and mounting points in place....

Replica Rear Fender Raw Fender uses late 1973-up large style tail lamp. We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hinge and brackets...

Front Fender Spring Fork Raw Fender is without brackets. We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hinge and brackets will have to...

Rear Fender Bobbed Raw Fender is without reflector indents. We suggest pre fitting the fender prior to painting. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in...

XL Bobbed Rear Fender Kit We suggest pre fitting fender prior to painting. Order chrome struts and covers separately. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result...

Front Fender Raw Steel Brackets are riveted in place. Does not come with a cable bracket. We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces and mounting points in place. Fender...

XL Bobbed Rear Fender Only Includes the mud guard. *NOTE: Must order tail lamp bracket license plate and hardware separately. *NOTE: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will...

Rear Fender Kit Bobbed We suggest pre fitting fender prior to painting. Order sissy bar components separately. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in higher...

Rear Fender Kit Bobbed We suggest pre fitting the fender prior to painting. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hinge and brackets will have to be tweaked for final fitment....

Rear Fender Bobbed Steel Will not fit stock fender struts. Fender may require trimming and finishing for chain relief. We suggest pre fitting the fendor prior to painting. Note: All fenders are shipped raw. Fenders have tooling marks on the...