Replica Chrome Oil Tank Tank has screw in dipstick and two battery rod tab supports. Wrap around swingarm oil tanks holds a 6V tall H-2 style battery and has two tabs welded on to secure battery rod set. *NOTE: The...

Replica Chrome Oil Tank Tank has a rubber plug. Use with 1936-1957 battery rod tab supports. Tank measures 10-1/4 inch wide X 7-1/8 inch tall. Battery box measures 7-1/8 inch tall X 4-1/4 inch wide. Oil fitting is 20 TPI...

Replica Chrome Oil Tank Tank is equipped with a screw in dipstick. Tank does not have battery rod tabs. Can be used in later applications with changing the battery rods to early style battery rods. *NOTE: The battery compartment dimensions...

Gas and Oil Tank Set Raw Drain plug is 5/8 inch-18UNF. Feed thread is 1/8 inch-27NPT. Vent hole for banjo bolt is 3/8 inch-24 UNF. Return Hole is 1/8 inch-27NPT. May require fuel rod alignment using V-Twin #16-0182* prior to...

Chrome Oil Tank Kit The cap assembly includes retaining ring and gasket. Mounting kit includes zinc plated bolts and hardware to mount tank to frame and battery box. *Note: UPS may consider this part as packaged inchoversize inch for shipment...

Replica Black Oil Tank Bottom feed hole is 3/4 inch - 20 TPI and requires a fitting to resize the hole to 1/2 inch - 20 TPI for the banjo bolt. The left vent hole is 3/8 inch - 24...

Replica Black Oil Tank Rear feed fitting hole must be tapped larger to fit a banjo bolt. *NOTE: Must order fittings for steel lines or hoses separately. *NOTE: Features 1/8 NPT internal threads for vent and return lines. *NOTE: The...

Replica Chrome Oil Tank Tanks are heavily oiled inside for rust protection for the many years they may be on the shelf. *NOTE: The battery compartment dimensions are 5 inch wide x 4-1/2 inch long x 7 inch tall. Measurements:...

Oil Tank Drain Block Our billet oil drain block allows remote mounting and includes drain plug.

Rocket Oil Tank Raw Oil tank comes with a battery box. Tank can accept push in cap. Measurements: Fittings: 1/8 inches -27NPT Instructions: http://www.vtwinmfg.com/Instructions/40/40-0487.pdf FITS Harley Davidson FLST 1986 Harley Davidson FLST 1987 Harley Davidson FLST 1988 Harley Davidson FLST...

Replica Chrome Tourist Trophy Bobber Short Oil Tank NOTE: Purpose of tank is to raise the transmission and clutch pak for TT racing or hillclimbing for greater ground clearance. Raise transmission mount plate with 1-5/16 inch spacers and mount as...

Replica Raw Oil Tank Tank is equipped with a screw in dipstick but does not have battery rod tabs. *NOTE: The battery compartment dimensions are 5 inch wide x 4-1/2 inch long x 7 inch tall. Measurements: Battery Width: 4-7/8...

York Electric Start Oil Tank Chrome Clamps for battery must be fabricated. The battery will require spacing to secure in place by the builder. *NOTE: Batteries must be ordered separately. Electric start uses Anti Gravity 12 Volt 16 Cell Battery....

Replica Black Tourist Trophy Bobber Short Oil Tank Tank raises the transmission and clutch pak for TT racing or hillclimbing for greater ground clearance. Battery compartment is short so a small battery is required. Chain guard will be in a...

Oil Tank Dipstick Oil tank dipstick is stock style. FITS Harley Davidson FL 1965 Harley Davidson FL 1966 Harley Davidson FL 1967 Harley Davidson FL 1968 Harley Davidson FL 1969 Harley Davidson FL 1970 Harley Davidson FL 1971 Harley Davidson...

Oil Tank Drain Plug This zinc oil tank drain plug FITS Harley Davidson FLST 1990 Harley Davidson FLST 1991 Harley Davidson FLST 1992 Harley Davidson FLST 1993 Harley Davidson FLST 1994 Harley Davidson FLST 1995 Harley Davidson FLST 1996 Harley...

Oil Tank Drain Plug This oil tank drain plug is magnetic & used for transmission and oil tank drains. It is also used for the inner primary. FITS Harley Davidson FLST 2000 Harley Davidson FLST 2001 Harley Davidson FLST 2002...

Oil Tank Cap Assembly Chrome oil tank cap assembly comes assembled with the retaining ring and gasket. FITS Harley Davidson FL 1965 Harley Davidson FL 1966 Harley Davidson FL 1967 Harley Davidson FL 1968 Harley Davidson FL 1969 Harley Davidson...

Kick Starter Oil Tank Black This black oil tank fits kick starter rigid or stock frames and includes fill plug. FITS Harley Davidson XLCH 1970 Harley Davidson XLCH 1971 Harley Davidson XLCH 1972 Harley Davidson XLCH 1973 Harley Davidson XLCH...

Replica Oil Tank Kit *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in higher shipping costs. *NOTE: The battery compartment dimensions are 5 inch wide x 4-1/2...

York Electric Start Oil Tank Black Clamps for battery must be fabricated. The battery will require spacing to secure in place by the builder. *NOTE: Batteries must be ordered separately. Electric start uses Anti Gravity 12 Volt 16 Cell Battery....

Oil Tank Kit *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in higher shipping costs. *NOTE: The battery compartment dimensions are 5 inch wide x 4-1/2 inch...

Electric Start Oil Tank Black Accepts a 12 volt FXE type battery and braided or rubber lines. For use with stock rigid or swingarm frames. *NOTE: The battery has to be installed in the oil tank before mounting the oil...

Replica Oil Tank Chrome with Smooth Top Tank is equipped with a screw in dipstick. Tank does not have battery rod tabs. *NOTE: Must order banjo bolts and fittings for oil lines separately. Lower right hand feed outlet must be...