Carburetor Needle Valve Unit features a lift and twist 3 position knob. Always lift and twist carefully to avoid damaging the brass step positions. FITS Harley Davidson EL 1936 Harley Davidson EL 1937 Harley Davidson EL 1938 Harley Davidson EL...

Nickel Plated Intake Manifold Nut and Seal Kit Sold as a set of 2. FITS Harley Davidson EL 1936 Harley Davidson EL 1937 Harley Davidson EL 1938 Harley Davidson EL 1939 Harley Davidson UL 1937 Harley Davidson UL 1938 Harley...

Replica M41 45 Linkert Carburetor All linkerts are supplied in natural brass finish. Choke lever is included. *NOTE: Sold outright. No exchange necessary. All parts are brand new by V-Twin assembled by V-Twin Motor Shop! FITS Harley Davidson VL 1930...

Petcock with Threaded End The hose size measures 7/16 and features a lever on both sides. FITS Harley Davidson K 1952 Harley Davidson K 1953 Harley Davidson K 1954

Zicad Plated 45 inch Intake Manifold Kit *NOTE:: Zicad is a dull shade of zinc similar to cadmium. FITS Harley Davidson G 1937 Harley Davidson G 1938 Harley Davidson G 1939 Harley Davidson G 1940 Harley Davidson G 1941 Harley...

Oversize Carburetor Throttle Disc for 1-1/4 Carburetor Carburetor throttle disc is .025 oversize. Used for 1-1/4 inch carburetor that requires an oversized throttle disc due to wear. FITS Harley Davidson WL 1929 Harley Davidson WL 1930 Harley Davidson WL 1931...

Replica Petcock Nickel Plated *NOTE: Diassemble petcock remove cotter pin and use fine compound to inchlap in inch taper for a non-leak seal. FITS Harley Davidson J 1915 Harley Davidson J 1916 Harley Davidson J 1917 Harley Davidson J 1918...

Linkert Carburetor Venturi This Venturi will allow the atmospheric air to pass thru the Linkert carburetor at a faster velocity. This will create a better vacuum to allow the gas to be pulled up from the bowl thru the main...

inchL inch Series Carburetor Throttle Shaft Throttle shaft inchL inch type is for S&S inchL inch series 1-7/8 inch carburetors.

Linkert Carburetor Bombsight Venturi The construction resembles a WWII inchbombsight inch. This venturi will replace those in the MR-3* MR-4* MR-4A and the M53 K-model and also any 1-1/2 inch bore M series carburetor as a inchsleeper inch. *NOTE: inchBombsight...

Linkert Thumb Choke Lever Linkert thumb choke lever includes detent ball and spring. FITS Harley Davidson EL 1936 Harley Davidson EL 1937 Harley Davidson EL 1938 Harley Davidson EL 1939 Harley Davidson EL 1940 Harley Davidson EL 1941 Harley Davidson...

Linkert Carburetor Bombsight Venturi *NOTE: inchBombsight inch type venturi's may require a shorter main nozzle. FITS Harley Davidson W 1941 Harley Davidson W 1942 Harley Davidson W 1943 Harley Davidson W 1944 Harley Davidson W 1945 Harley Davidson W 1946...

Indian Linkert Needle and Seat Kit The tip is metal. The gas line fitting end is 1/8 inch NPT. For use in Indian linkert carburetors only. FITS Harley Davidson INDIAN 1952 Harley Davidson INDIAN 1953

Linkert Carburetor Choke Cam Zinc Plated Zinc plated linkert carburetor choke cam FITS Harley Davidson INDIAN 1952

Replica M51 Langhorne Linkert Carburetor Features a side vent hole. *NOTE: 90 WR fuel nitrophyl float fitting supplied. *NOTE: Sold outright. No exchange necessary. All parts are brand new by V-Twin assembled by V-Twin Motor Shop! *NOTE: Original inchBean Pot...

Linkert Side Valve Choke Disc Kit For use with 1-1/2 inch brass Linkert carburetors. *NOTE: Lever screws not included must order separately. Tech Notes: Suggested to use with #35-9135 Carburetor Choke Lever Screw. FITS Harley Davidson EL 1937 Harley Davidson...

1-1/16 inch Linkert Carburetor Venturi This venturi is for M2* M5* M21* M41* M51* M52* M55* M58* M64* M65* M84* M88 & M97. FITS Harley Davidson W 1941 Harley Davidson W 1942 Harley Davidson W 1943 Harley Davidson W 1944...

1-1/8 inch Linkert Carburetor Venturi Fits M-51L and M-41L carburetors. FITS Harley Davidson U 1941 Harley Davidson U 1942 Harley Davidson U 1943 Harley Davidson U 1944 Harley Davidson U 1945 Harley Davidson U 1946 Harley Davidson U 1947 Harley...

SV Linkert Carburetor Float Bowl Assembly Includes nitropyl float and one piece float arm. Float bowl has drain plug provisions. Assembly is for all Side Valve Flathead models including K-model engines. Bowl features hex cap over the needle seat chamber....

Standard Linkert Throttle Door Standard linkert carburetor throttle disc is for 1-1/4 inch bore carburetors. Stamped #13 with correct bevel standard size. FITS Harley Davidson G 1936 Harley Davidson G 1937 Harley Davidson G 1938 Harley Davidson G 1939 Harley...

Linkert Snap Throttle Shaft *NOTE: The shaft is longer to accommodate lower spring installation. Tech Notes: Suggested to use with #35-1713 Linkert Snap Throttle Kit. FITS Harley Davidson FL 1941 Harley Davidson FL 1942 Harley Davidson FL 1943 Harley Davidson...

Snap Throttle Flat Arm Snap Throttle Flat Arm with 5 holes mounts to throttle lever arm base. Tech Notes: Suggested to use with #35-0753 Linkert Throttle Lever Base FITS Harley Davidson FL 1949 Harley Davidson FL 1950 Harley Davidson FL...

Intake Manifold Nut Set Nut set for 1.700 inch diameter intake manifold. FITS Harley Davidson K 1952 Harley Davidson K 1953 Harley Davidson K 1954 Harley Davidson K 1955 Harley Davidson K 1956 Harley Davidson WR 1936 Harley Davidson WR...

Cast Iron Intake Manifold Manifold is not recessed it is machined on to the gasket surface. Requires use of spacer and/or insulator block to add length to mainfold which are sold separately. Tech Notes: Suggested to use #35-0541 Three Bolt...