Handlebar Wiring Extension 4" for '07-'13 FL 2120-0221 Namz  All the items needed to successfully extend the wiring to a set of OEM H-D handlebar switches Harnesses include both male and female Molex terminals crimped on each end Kit includes...

Product Specifications: Designed to have proper clearance on FLHT/FLHX models with the "batwing" fairing Notched for throttle-by-wire Large laser-cut, burr-free wiring slots Allow the use of factory heated grips and all stock controls 10" Ape Hangers work with stock length...

Sold as a kit of two risers, one-piece top clamp and all necessary hardware Available for handlebars that have a 1" or 1-1/2" diameter clamping area Tapped for 1/2"-13 bolts Made in the U.S.A. PRODUCT NAME RISER TYPE STRAIGHT COLOR/FINISH...

Designed specifically as a direct bolt-on upgrade for Road Glide models Bars include black control clamps to replace the "oversize" OEM clamps Do not need to remove stock pin in the OEM mount clamps; bars still have more than 35°...

Product Specifications: Feature 1-1/4" diameter in the clamping area Work with the OEM riser clamps; have the correct wire exit location Bars include control clamps to replace the oversize OEM clamps Do not need to remove the stock pin in...

Product Specifications: A new twist on the conventional ape Mitered tip with a traditional two-bend bottom Accommodates both electronic and cable throttles Designed for internal wiring Double-wall design for added strength Designed to work with hydraulic clutch and brake master...

V-Twin Handlebar Control Switch Housing Kit Black 32-0278 Part # 32-0278 32-0278 Black handle bar control switch housing kit with black left and right switches. Kit comes pre-wired and features a 60" wiring harness and all necessary mounting hardware. Fits...

Product Specifications: Made with high-strength 1-1/4" diameter steel tubing TIG-welded for strength; welds are polished for a seamless appearance 3-1/2" on-center risers Drilled for internal wiring Accept stock controls Made in the U.S.A. PRODUCT NAME HANDLEBAR TYPE/BEND MITER-T COLOR/FINISH BLACK...

Product Specifications: For use in 1" stock-style handlebar clamps Accept standard bar grips and controls Fit most models with risers 3-1/2" on-center Made in the U.S.A. Not for use with stock riser and handlebar clamp/gauge mounts on 883C/1200C models Accepts...

Steel tubing Available with dimples in a smooth, unknurled style Made in the U.S.A. PRODUCT NAME HANDLEBAR COLOR/FINISH BLACK / GLOSS BASE COLOR BLACK FINISH GLOSS FEATURES NOTCHED FOR THROTTLE-BY-WIRE / ACCEPTS HEATED GRIPS / PRE-DRILLED TYPE/BEND SUPERBAR RISE 2-1/2"...

OEM-replacement switch kits with color-coded leads and black protective sleeves 60" leads Meets or exceeds OEM specifications Fits U.S.A. and International models PRODUCT NAME SWITCH KIT COLOR/FINISH BLACK BASE COLOR BLACK NUMBER OF BUTTONS 4 MOUNTING POSITION LOWER LEFT /...

Product Specifications: Complete kit includes the correct length braided brake/clutch lines and wire extensions to complete a handlebar swap Chrome "T" brake line junction, banjo bolts, fittings and copper crush washers included Made in the U.S.A. Kit is based on...

Product Specifications: Standard kit includes clutch line, brake lines, chrome "T" brake line junction, banjo bolts, fittings and copper crush washers Correct length brake/clutch lines and wire extensions included to complete a handlebar swap Electrical wire extensions NOT included (available...

Product Specifications: Allow you to adjust the pullback on your handlebars Design lets you move the bars either toward or away from you CNC-machined from billet aluminum Come with handlebar mounting hardware that is hidden on installation for a clean...

The Fatbar Lite Carbon35 uses a full uni-directional (UD) carbon construction Efficient placement and orientation of the UD carbon fibers maximize the strength and fine tune the stiffness of the handlebar The UD carbon fibers are layered and aligned to...

9-1/4" Replica Handlebars Chrome for Harley Davidson by V-Twin 100% Genuine V-Twin Brand New! Full Manufacturer Warranty Replica chrome 1 touring handlebar features right side notches for throttle by wire application so will accept throttle by wire grips. Sold as:...

Suzuki OEM Part 56111-07G10 HANDLEBAR This listing is based on part, price, and inventory data that is provided directly from the OEM. Unfortunately, all of the key information and image/description content that you find with aftermarket products does not exist...

8" Buckhorn Handlebar without Indents for Harley Davidson by V-Twin 100% Genuine V-Twin Brand New! Full Manufacturer Warranty Chrome 1 handlebar are without knurls or indents. These mini buckhorn bars are a modified scaled down look and size of the...

Black Waffle Handlebar Grip Set with Chrome Plugs for Harley Davidson by V-Twin 100% Genuine V-Twin Brand New! Full Manufacturer Warranty Black waffle handlebar grip set are soft plastic and have an inner diameter of 1-1/8 and are 4 long...

Cycra Ultra Probend CRM Wrap Around Handguards White/White 7/8 Handlebars Design combines the premium features of Cycra handguards that customers have come to love and depend on The new CRM clamp provides maximum bite to secure the handguards and allows...

Durable PVC cover High-density, injection molded foam to reduce rider injury Extremely lightweight hook and loop fastening Power-Wash proof permanent graphics Sold individually Type:   Crossbar Pad Style:   Mini Model:   SX Color:   Black | Red Size:   Mini Length:   8" (203mm) Material:...

1-1/2" of total movement (moves the bar approximately 1-1/4" up and 3/4" back from the OEM position) Machined from 6061-T6 Aircraft Grade Billet Aluminum Work with stock cables – cable rerouting instructions provided Engraved Rox logo for a clean and...

Product Specifications: Designed for all day comfort riding with aggressive styling Feature 1-1/4" diameter in the clamping area Work with the OEM riser and clamps; have the correct wire exit location Bars include new black control clamps to replace the...

Burly Brand 1-1/4" Black 15" Bagger Ape Handlebar Optimum high bar styling custom tailored for baggers CNC bent curves snake around gauges and avoid interfering with speakers or fairing mounted mirrors 1" clamping area, dimpled and drilled for internal wiring...