Replica Brake Cable 45 inch NOTE: Outer cable are crimped on each end and includes oiler fitting that is installed. FITS Harley Davidson EL 1936 Harley Davidson EL 1937 Harley Davidson EL 1938 Harley Davidson EL 1939 Harley Davidson EL...

WR 45 inch Brake Pedal Zicad Plated This is an ingenious design which incorporates the pedal and bell crank into one. This mounts to rear footboard rod and pivots on it. Use the long rear brake linkage to connect to...

Spring Fork Front Brake Shoe Kit Kit is for Big Twin forks with offset rockers and stepped axle. Measurements: Shoe Outer Diameter: 6-7/8 inches FITS Harley Davidson EL 1936 Harley Davidson EL 1937 Harley Davidson EL 1938 Harley Davidson EL...

Spring Fork Front Brake Anchor Stud Kit Brake cable anchor stud for front backing plate was used until 1940 on Knucklehead VL UL RL and WL 45s. You can also use this stud to make a 1941 and up backing...

Replica 45 Brake Pedal Chrome Replica chrome 45 brake pedal has original style foot grip surface. Includes grease fitting. FITS Harley Davidson G 1941 Harley Davidson G 1942 Harley Davidson G 1943 Harley Davidson G 1944 Harley Davidson G 1945...

Spring Fork Front Brake Lever Chrome Spring Fork front brake arm is stamped with 4 holes for solo and side cars with lettering as original. FITS Harley Davidson EL 1936 Harley Davidson EL 1937 Harley Davidson EL 1938 Harley Davidson...

Spring Fork Brake Stay Tab Raw Spring Fork brake stay tab must be welded on FITS Harley Davidson EL 1936 Harley Davidson EL 1937 Harley Davidson EL 1938 Harley Davidson EL 1939 Harley Davidson EL 1940 Harley Davidson FL 1941...

Rigid Brake Cross Shaft Kit To hold cross shaft installation requires welding or brazing. Use actual cross shaft for alignment. FITS Harley Davidson EL 1936 Harley Davidson EL 1937 Harley Davidson EL 1938 Harley Davidson EL 1939 Harley Davidson EL...

Spring Fork Front Brake Seal Kit Spring fork front brake grease seal kit includes spring steel washer and cork gasket. FITS Harley Davidson EL 1937 Harley Davidson EL 1938 Harley Davidson EL 1939 Harley Davidson EL 1940 Harley Davidson EL...

Replica Front Brake Cable Adjuster Screw Parkerized Front brake cable adjuster screw with a parkerized finish. FITS Harley Davidson FL 1941 Harley Davidson FL 1942 Harley Davidson FL 1943 Harley Davidson FL 1944 Harley Davidson FL 1945 Harley Davidson FL...

Pulley Brake Disc Spacer Steel 3/16 inch Thickness *NOTE: For 4 and 5 speed models with Mag or spoked wheels to fit 2-11/16 inch hubs. For spacing out rear sprocket rotor or pulley. The 2-1/16 inch inner diameter fits 1980-1999...

Pulley Brake Disc Spacer Steel 1/4 inch Thickness For spacing out rear sprocket rotor or pulley. The 2-1/16 inch inner diameter fits 1980-1999 FX-FL-XL hubs. Measurements: Thickness: 1/4 inches

Pulley Brake Disc Spacer Steel 5/16 inch Thickness For spacing out rear sprocket rotor or pulley. The 2-1/16 inch inner diameter fits 1980-1999 FX-FL-XL hubs.

Polished Brake Handle Cable Kit Polished brake handle cable kit is single disc and includes internals and lever assembled. FITS Harley Davidson FL 1965 Harley Davidson FL 1966 Harley Davidson FL 1967 Harley Davidson FL 1968 Harley Davidson FL 1969...

Pulley Brake Disc Spacer Billet .250 inch Thickness *NOTE: Inner Diameter is 2-1/4 inch to fit 2000-UP rear hubs on FX FL and XL models.

Pulley Brake Disc Spacer Alloy 1/4 inch Thickness For spacing out rear sprocket rotor or pulley. The 1.97 inch inner diameter fits 1980-1999 FX-FL-XL hubs. Measurements: Inner Diameter: 1.97 inches

Pull Type Brake Switch New Old Stock inch mechanical brake light black switch pull type. FITS Harley Davidson XLCH 1975 Harley Davidson XLCH 1976 Harley Davidson XLH 1975 Harley Davidson XLH 1976

Rear Brake Pivot Lever Stud Nut Zinc Zinc rear brake pivot lever stud 7/16 inch x 20 flex lock nut is 11mm tall. FITS Harley Davidson EL 1936 Harley Davidson EL 1937 Harley Davidson EL 1938 Harley Davidson EL 1939...

Rear Brake Pivot Lever Stud Nut Chrome Chrome rear brake pivot lever stud 7/16 inch x 20 flex loc nut is 11mm tall. FITS Harley Davidson EL 1936 Harley Davidson EL 1937 Harley Davidson EL 1938 Harley Davidson EL 1939...

Rear Brake Pivot Lever Stud Nut Parkerized Parkerized rear brake pivot lever stud 7/16 inch x 20 flex lock nut is 11mm tall. FITS Harley Davidson EL 1936 Harley Davidson EL 1937 Harley Davidson EL 1938 Harley Davidson EL 1939...

Polished Brake Lever Assembly NOTE: Does not have hole for mirror which is specific for 1965 only. FITS Harley Davidson FL 1965 Harley Davidson FL 1966 Harley Davidson FL 1967 Harley Davidson FL 1968 Harley Davidson FL 1969 Harley Davidson...

Polished Clutch/Brake Hand Lever Assembly Assembly includes cable pin. Lever has a 5/16 inch hole size for cable entry. Tech Notes: 1941-1968 Big Twin as brake lever 1952-1967 Big Twin as clu tch lever FITS Harley Davidson FL 1965 Harley...

Polished Clutch/Brake Hand Lever Assembly For a most accurate reproduction replace pivot screw with cadmium lever pivot screw. The hole size is 0.296 inch and the cable hole is 0.14 inch. Tech Notes: Suggested to use with #8819-4 Cadmium Lever...

Polished Brake Lever Assembly This specific ass brake lever assembly is for use on 1941-1942 models. For a most accurate reproduction replace pivot screw with cadmium lever pivot screw. Assembly has a closed bracket area for the cable entry. ***NOTE:...