Your search for "{{ terms }}" did not yield any results.
Fuel SystemWheels & RimsSuspensionCrash ProtectionGraphicsBatteries & ChargersLights & ElectricalWindscreens & AccessoriesWindshieldsFarming & HuntingWinch & PlowLuggage & RacksShop All Parts
Service ManualsOil Drain PansTool Racks & CabinetsWork GlovesShop SuppliesShop All Maintenance
Showing 833 products
SKU: 16-1368
AVAILABILITY: In stock (2 items)
PRODUCT TYPE:
VENDOR: Jims
Starter Ring Gear Rivet Fixture Tool This tool removes the starter ring gear rivets from clutch shells. FITS Harley Davidson FLST 1990 Harley Davidson FLST 1991 Harley Davidson FLST 1992 Harley Davidson FLST 1993 Harley Davidson FLST 1994 Harley Davidson...
SKU: 16-1357
AVAILABILITY: In stock (10 items)
Primary Locking Tool The Jims primary locking tool is used to lock the clutch hub sprocket to the front engine sprocket. It also allows the removal or torquing of clutch hub and engine nut. FITS Harley Davidson FXD 2006 Harley...
SKU: 16-1375
Jims Case Bearing Conversion Tool This tool includes one bearing insert held under .002 inch TIR (total indicator reading) bearing is manufactured from aerospace quality steel that is several times stronger than the aluminum case material that the standard bearing...
SKU: 16-1371
AVAILABILITY: In stock (9 items)
VENDOR: Motorshop
Wheel Bearing Installer Tool *NOTE: Required to use with the wheel bearing puller/installer tool availble separately. Tech Notes: Required to use with #16-0558 Wheel Bearing Puller/Installer Tool. FITS Harley Davidson FLST 2007 Harley Davidson FLST 2008 Harley Davidson FLST 2009...
SKU: 16-1364
Sprocket Shaft Bearing and Seal Installation Tool Adapter Allows for installation of Timken bearings and roller bearing race assembly onto the sprocket shaft. Instructions: http://www.vtwinmfg.com/Instructions/16/16-1364.pdf FITS Harley Davidson FLST 2007 Harley Davidson FLST 2008 Harley Davidson FLST 2009 Harley Davidson...
SKU: 16-1385
VENDOR: Lisle Corp.
Oxygen Sensor Plug Thread Chaser Tool 18mm For use with 18mm sensors and can be used with either 3/8 inch drive ratchet FITS Harley Davidson FLST 2007 Harley Davidson FLST 2008 Harley Davidson FLST 2009 Harley Davidson FLT 2007 Harley...
SKU: 16-1378
Shaft Turning Tool This Jims shaft turning tool fits spline or taper on assembled motor and allows engine to be turned over by 1/2 inch ratchet or impact driver. Instructions: http://www.vtwinmfg.com/Instructions/16/16-1378.pdf FITS Harley Davidson FLST 2007 Harley Davidson FLST 2008...
SKU: 16-1390
TC-88 Inner Cam Bearing Tool Complete 8 piece tool by V Twin manufacturing. FITS Harley Davidson FLST 1999 Harley Davidson FLST 2000 Harley Davidson FLST 2001 Harley Davidson FLST 2002 Harley Davidson FLST 2003 Harley Davidson FLST 2004 Harley Davidson...
SKU: 16-1388
AVAILABILITY: Out of Stock
VENDOR: V-Twin
45 Cam Cover Fixture Tool 45 cam cover fixture tool is used to line the reaming on 45 right side cases. Tool is used with appropriate reamers. Instructions: http://www.vtwinmfg.com/Instructions/16/16-1388.pdf FITS Harley Davidson G 1941 Harley Davidson G 1942 Harley Davidson...
SKU: 16-1391
Cam Bearing Remover Tool For use with bearing as listed. *NOTE: The shaft diameter before the flare measures 0.974 inch. FITS Harley Davidson FLST 2007 Harley Davidson FLST 2008 Harley Davidson FLST 2009 Harley Davidson FLST 2010 Harley Davidson FLST...
SKU: 16-1392
Cam Bearing Puller Tool For use with bearing as listed. *NOTE: The shaft diameter before the flare measures 0.672 inch. Tech Notes: Suggested to use with #12-0425 Cam Gear Bearing. FITS Harley Davidson XL 1957 Harley Davidson XL 1958 Harley...
SKU: 16-1404
AVAILABILITY: In stock (3 items)
Linkert Hand Tool Tap 5/16 inch X 32 Linkert hand tool tap 5/16 inch X 32 thread. FITS Harley Davidson FL 1941 Harley Davidson FL 1942 Harley Davidson FL 1943 Harley Davidson FL 1944 Harley Davidson FL 1945 Harley Davidson...
SKU: 16-1400
Linkert Hand Tool Tap 10-32 Linkert hand tool tap 10-32 thread. Measurements: Shank Diameter: 0.4375 inches FITS Harley Davidson FL 1941 Harley Davidson FL 1942 Harley Davidson FL 1943 Harley Davidson FL 1944 Harley Davidson FL 1945 Harley Davidson FL...
SKU: 16-1403
Linkert Hand Tool Tap 5/16 inch X 18 Linkert hand tool tap 5/16 inch X 18 thread. FITS Harley Davidson FL 1941 Harley Davidson FL 1942 Harley Davidson FL 1943 Harley Davidson FL 1944 Harley Davidson FL 1945 Harley Davidson...
SKU: 16-1402
Linkert Hand Tool Tap/Die 1/4 inch X 40 Set Sold as a 2 piece set. FITS Harley Davidson FL 1941 Harley Davidson FL 1942 Harley Davidson FL 1943 Harley Davidson FL 1944 Harley Davidson FL 1945 Harley Davidson FL 1946...
SKU: 16-1405
Linkert Tool Kit Kit includes 6 drill pivots and 1 idle slot tool blade. Drill bit sizes include #55 (1.3mm) #53 (1.5mm) #56 (1.2mm) #42 (2.3mm) #72 (0.6mm). The #55 drill bit is used by two different length handles. Slot...
SKU: 16-1505
Sprocket Nut Wrench Tool Collar Nut lock wrench collar features parkerized finish. Tech Notes: Suggested to use with 16-0821 Counter Sprocket Nut Tool and 16-0757 Jims Countershaft Nut Sprocket Tool FITS Harley Davidson FL 1941 Harley Davidson FL 1942 Harley...
SKU: 16-1191
Jims M8 Shifter Mechanism Sleeve Remover and Installer Jims shifter mechanism sleeve is for removing and installing the shifter mechanism sleeve in M8 transmissions. The sleeve can be removed and installed correctly without disassembling the transmission. FITS Harley Davidson FLST...
SKU: 16-1401
Linkert Hand Tap Tool 12-24 Linkert hand tool tap 12-24 thread. FITS Harley Davidson FL 1941 Harley Davidson FL 1942 Harley Davidson FL 1943 Harley Davidson FL 1944 Harley Davidson FL 1945 Harley Davidson FL 1946 Harley Davidson FL 1947...
SKU: 16-1506
4-Speed Shaft Fixture Tool Build your own! FITS Harley Davidson FL 1941 Harley Davidson FL 1942 Harley Davidson FL 1943 Harley Davidson FL 1944 Harley Davidson FL 1945 Harley Davidson FL 1946 Harley Davidson FL 1947 Harley Davidson FL 1948...
SKU: 16-1514
Clutch Compression Tool Clutch compression tool has adapter included Instructions: http://www.vtwinmfg.com/Instructions/16/16-1514.pdf FITS Harley Davidson FLST 1990 Harley Davidson FLST 1991 Harley Davidson FLST 1992 Harley Davidson FLST 1993 Harley Davidson FLST 1994 Harley Davidson FLST 1995 Harley Davidson FLST 1996...
SKU: 16-1615
Chain Puller Tool Chain puller tool.
SKU: 16-1618
VENDOR: Namz
Wire Terminal Removal Tool Wire terminal removal tool for Mate-N-Lock terminals.
SKU: 16-1614
18mm Spark Plug Wrench Set For use with 1-5/32 inch OEM style spark plugs only. Order rivet set tool separately. FITS Harley Davidson FL 1941 Harley Davidson FL 1942 Harley Davidson FL 1943 Harley Davidson FL 1944 Harley Davidson FL...
WHAT ARE YOU LOOKING FOR?
Search for "{{ result }}"
Thanks for subscribing!
We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.
Thanks for contacting us. We'll get back to you as soon as possible.
