4-Speed Prepped Transmission Case Studs should be installed with protrusion as noted: kicker studs 7/8 inch (22.2mm) mount studs 15/16 inch (23.8mm) for kick start applications. Right side bearing housing and kicker cover studs not included. FITS Harley Davidson EL...

FLH Rotary to Ratchet Transmission Top Conversion Kit Ratchet top conversion casting allows ratchet top components to be used on 1979-1984 FX-FL shift pattern transmissions. Ratchet top design is much more durable than the rotary or inchCow Pie inch top....

EL Transmission Kick Starter Cover Natural This cover is great for Retro looks! Cover accepts 1936-1940 one piece kick starter arms. *NOTE: Cast marked with #1 on the lower left side of the cover. kick cover utilizes bracket at the...

Transmission Sprocket 21 Tooth Can be used with 530 chain. FITS Harley Davidson XL 1991 Harley Davidson XL 1992 Harley Davidson XL 1993 Harley Davidson XL 1994 Harley Davidson XL 1995 Harley Davidson XL 1996 Harley Davidson XL 1997 Harley...

EL Transmission Mount Bracket Zicad Plated *NOTE: Zicad is a dull shade of zinc similar to cadmium. FITS Harley Davidson EL 1936

Transmission Sprocket 22 Tooth 22 Tooth transmission sprocket with 33 inner splines. FITS Harley Davidson XL 1991 Harley Davidson XL 1992 Harley Davidson XL 1993 Harley Davidson XL 1994 Harley Davidson XL 1995 Harley Davidson XL 1996 Harley Davidson XL...

23 Tooth Transmission Sprocket Kit NOTE: Remember a larger sprocket on rear means more torque (geared down) and a larger front sprocket means higher gears more top end. Measurements: Spacer Thickness: 0.202 inches Tech Notes: Suggested to use with #20-0253...

Transmission Clutch Release Cover Transmission clutch release cover features a black finish. FITS Harley Davidson FLST 1986 Harley Davidson FLST 1987 Harley Davidson FLST 1988 Harley Davidson FLST 1989 Harley Davidson FLST 1990 Harley Davidson FLST 1991 Harley Davidson FLST...

4-Speed Transmission Case ES Case uses mainshaft bearing Torrington needle type and reverse gear idler shaft (not the 88 loose rollers). Loctite recommended for mount stud installation. No Manufacturer's Statement of Origin required Bill of Sale only. *NOTE: Bushings are...

Lid Assembly for 3-Speed Transmission Lid assembly for jockey style 3-speed & reverse transmission FITS Harley Davidson FL 1941 Harley Davidson FL 1942 Harley Davidson FL 1943 Harley Davidson FL 1944 Harley Davidson FL 1945 Harley Davidson FL 1946 Harley...

Transmission Top Cover Chrome Chrome 5-speed transmission top cover. FITS Harley Davidson FLST 1987 Harley Davidson FLST 1988 Harley Davidson FLST 1989 Harley Davidson FLST 1990 Harley Davidson FLST 1991 Harley Davidson FLST 1992 Harley Davidson FLST 1993 Harley Davidson...

Replica Transmission Case Studs should be installed with protrusion as noted: kicker studs 7/8 inch (22.2mm) case mount stud thread is 7/16-14 inch for kick start applications. No Manufacturer's Statement of Origin required Bil of Sale only. Loctite recommended for...

Transmission Sprocket 24 Tooth Allows the installation of a 180 tire without transmission offset. .900 offset is the maximum offset without any modification to the stock inner primary. Tech Notes: .500inch offset is measured from the back side of the...

Transmission Sprocket 23 Tooth Allows the installation of a 180 tire without transmission offset. .900 offset is the maximum offset without any modification to the stock inner primary. Tech Notes: .500inch offset is measured from the back side of the...

4-Speed Transmission Case Assembly 1965-1984 Includes 4th gear race right side ball bearing countershaft bushings kick stud primary studs and lock plate. Includes 3 sets of studs installed with the following protrusions: kicker - 7/8 inch (22.2mm) mount - 15/16...

Transmission Top Cover Chrome Chrome 5-speed transmission top cover. FITS Harley Davidson FLST 1987 Harley Davidson FLST 1988 Harley Davidson FLST 1989 Harley Davidson FLST 1990 Harley Davidson FLT 1987 Harley Davidson FLT 1988 Harley Davidson FLT 1989 Harley Davidson...

Offset Transmission Sprocket 22 Tooth 22 Tooth transmission sprocket with a 1/2 inch offset for a 200 series tire.

Transmission Sprocket 26 Tooth This new sprocket is great for OE replacement. Tech Notes: Suggested to use with #20-0217 Pulley Indexing Flange Nut. FITS Harley Davidson FLST 2007 Harley Davidson FLST 2008 Harley Davidson FLST 2009 Harley Davidson FLST 2010...

Transmission Sprocket 24 Tooth This new sprocket is great for OE replacement. Tech Notes: Suggested to use with #20-0217 Pulley Indexing Flange Nut. FITS Harley Davidson FLST 2007 Harley Davidson FLST 2008 Harley Davidson FLST 2009 Harley Davidson FLST 2010...

Transmission Sprocket 25 Tooth This new sprocket is great for OE replacement. Measurements: Center Hole: 1-13/16 inches Tech Notes: Suggested to use with #20-0217 Pulley Indexing Flange Nut. FITS Harley Davidson FLST 2007 Harley Davidson FLST 2008 Harley Davidson FLST...

Transmission Sprocket 25 Tooth This sprocket features a 1/2 inch offset for installing a slightly wider tire without needing to offset the primary or transmission. Tech Notes: Suggested to use with #20-0217 Pulley Indexing Flange Nut. FITS Harley Davidson FLST...

Transmission Sprocket 26 Tooth This sprocket features a 1/2 inch offset for installing a slightly wider tire without needing to offset the primary or transmission. Tech Notes: Suggested to use with #20-0217 Pulley Indexing Flange Nut. FITS Harley Davidson FLST...

Transmission Sprocket 24 Tooth This sprocket features a 1/2 inch offset for installing a slightly wider tire without needing to offset the primary or transmission. The thickness of the sprocket in the center splined area is 3/4 inch. Tech Notes:...

Transmission Sprocket 22 Tooth Order hex nuts with screws available separately. Tech Notes: Suggested to use with #20-0253 Hex Flange Sprocket Nut Black. FITS Harley Davidson FLST 1986 Harley Davidson FLST 1987 Harley Davidson FLST 1988 Harley Davidson FLST 1989...