Factory Sample 41MM Fork Slider Assembly Set of two. Assembly is for single disc application. Drain assembly lube. We recommend 20 weight oil for average conditions. Requires approximately 8.5 oz of fork oil per leg. *NOTE: Axle hardware not included....

Factory Sample 41mm Fork Slider Assembly Assembly has an overall length of 26-3/4 inch and is for dual disc applications fits 1 inch axle. Sold as a pair. Factory sample is a brand new pre-production part but may have imperfections...

Factory Sample 41mm Fork Slider Assembly Assembly is for a single disc application. Set of two. Factory sample is a brand new pre-production part but may have imperfections on the finished surface. Check threaded and bearing holes for excess plating...

Factory Sample 41mm Fork Slider Assembly Assembly is for single disc applications. Sold as a pair. The center of the axle to the top measures 33 inch. Factory sample are brand new pre-production parts but have imperfections in the finished...

Factory Sample 41mm Fork Slider Assembly 41mm fork sliders can also be used on 1948-1984 FL 1971-1984 FX 1986-1999 FLST 1984-1999 FXST 1986-1999 FLST and all billet or stock type 41mm triple trees. The axle holes go straight through on...

Factory Sample 41mm Fork Slider Assembly Chrome Allows the use of 1984-1999 style 21 inch wheel caliper and brake from the original motorcycle. Sold as a set of two. Factory sample is a brand new production part but may have...

Factory Sample 41mm Fork Slider Assembly Chrome The distance from the center of the axle to the top on fork plug measures 30-3/4 inch and the distance on the brake tabs center to center measures 3-1/2 inch. Assembly is for...

Factory Sample 41mm Fork Slider Assembly Chrome Chrome fork slider assembly for non fairing models. FITS Harley Davidson FLHR 2002 Harley Davidson FLHR 2003 Harley Davidson FLHR 2004 Harley Davidson FLHR 2005 Harley Davidson FLHR 2006 Harley Davidson FLHR 2007...

Factory Sample 41mm Fork Slider Assembly with Chrome Sliders Features hard chrome fork tubes chrome sliders springs and 1977-1984 type internal components installed. For single disc application. This leg assembly will accepts the stock banana type caliper. Sold as a...

Factory Sample 41mm Fork Slider Assembly with Chrome Sliders Features 24-1/4 inch long hard chrome fork tubes. The top to center of axle measures 33 inch. Sold as a pair. Factory sample is a brand new pre-production parts but may...

Factory Sample 41mm Fork Slider Assembly with Polished The length from the top to the center of the axle measures 33 inch and the axle hole size on one side measures 3/4 inch and the other 5/8 inch. Factory sample...

Factory Sample 41mm Fork Slider Set Black Will not fit Tri-Glide models. Factory samples are brand new pre-production parts but have imperfections in the finished surface. Check threaded and bearing holes for excess plating before installation. There are no physical...

Factory Sample 41mm Lower Fork Slider Set Chrome Suggested to use with 20 weight oil for average conditions. Set requires a specific axle per year range; can be used with a 1 inch bearing diameter axle on 2000-07 models or...

Factory Sample 42 inch Straight Fishtail Exhaust Extension S Fishtail tips are welded on in place and are straight through without baffles. Fits over 1-3/4 inch outer diameter pipes. Order clamps separately. Suggested to use a smooth clamp to attach...

Factory Sample 45 inch W/G Engine Case Set Includes right and left case races installed. Races must be line lapped prior to assembly. Factory sample is a brand new production part but may have imperfections in the finished surface. Check...

Factory Sample 5-3/4 inch Chrome Rocket Style Headlamp Factory sample are brand new pre-production parts but have imperfections in the finished surface. Check threaded and bearing holes for excess plating before installation. There are no physical defects such as cracks...

Factory Sample Aluminum Inner Primary Cover Cover does not have the hole for the shifter shaft. Factory sample cover are brand new pre-production parts but have imperfections in the finished surface. Check threaded and bearing holes for excess plating before...

Factory Sample Black Outer Primary Cover Accepts a 5-hole derby cover. Factory sample cover are brand new pre-production parts but have imperfections in the finished surface. Check threaded and bearing holes for excess plating before installation. There are no physical...

Factory Sample Black Wyatt Gatling Down Draft Drag Pipes Includes bracket to connect front and rear pipe together. Does not include bracket to attach to frame additional bracket may be fabricated and installed by the customer. Order baffles and flange...

Factory Sample Bobbed 3.5 Gallon Gas Tank Set Order screw bung cap set and petcock separately. Please test fitment before painting. Tank weld seams may require filler to meet your individual requirements. Do not grind or sand the seams as...

Factory Sample Bobbed 3.5 Gallon Gas Tank Set This flat side tank features a screw type bung. *NOTE: Must order ratcheting style gas caps separately. Petcock fitting should be masked or plugged during painting for easy installation. Carefully check the...

Factory Sample Bobbed 5.0 Gallon Gas Tank Set This flat side tank features a screw type bung. Petcock fitting should be masked or plugged during painting for easy installation of petcock. Carefully check the tank for flaws and fit before...

Factory Sample Bobbed 5.1 Gallon Gas Tank The center to center distance of the front and rear mount is 20 inch. The thread size for the hole next to the petcock hole measures 5/16 inch-24 *NOTE: Tank requires sanding and...

Factory Sample Bobbed 5.1 Gallon Gas Tank Check the tank for flaws and fit before painting. Tank requires sanding and primer. Do not grind or sand the seams or joints. The fuel line fitting should be masked or plugged during...