Your search for "{{ terms }}" did not yield any results.
Fuel SystemWheels & RimsSuspensionCrash ProtectionGraphicsBatteries & ChargersLights & ElectricalWindscreens & AccessoriesWindshieldsFarming & HuntingWinch & PlowLuggage & RacksShop All Parts
Service ManualsOil Drain PansTool Racks & CabinetsWork GlovesShop SuppliesShop All Maintenance
Showing 2393 products
SKU: 16-0337
AVAILABILITY: In stock (9 items)
PRODUCT TYPE:
VENDOR: Motorshop
Sprocket Rivet Tool Set This 2 piece parkerized sprocket rivet tool set includes one rivet set for heading rivet and one dowel punch to align the rivet so the sprocket and drum shell fit tightly together. FITS Harley Davidson FL...
SKU: 16-0153
Sprocket Shaft Bearing Nut Wrench Tool Sprocket shaft bearing nut wrench tool installs nut and seal. FITS Harley Davidson FL 1955 Harley Davidson FL 1956 Harley Davidson FL 1957 Harley Davidson FL 1958 Harley Davidson FL 1959 Harley Davidson FL...
SKU: 16-0058
Sprocket Shaft Bearing Tool Sold as a 4 piece set. FITS Harley Davidson FL 1955 Harley Davidson FL 1956 Harley Davidson FL 1957 Harley Davidson FL 1958 Harley Davidson FL 1959 Harley Davidson FL 1960 Harley Davidson FL 1961 Harley...
SKU: 12-0401
Sprocket Shaft Cage Set Sold as a set of 2. Measurements: Height: 14.6mm FITS Harley Davidson EL 1936 Harley Davidson EL 1937 Harley Davidson EL 1938 Harley Davidson EL 1939 Harley Davidson EL 1940 Harley Davidson FL 1941 Harley Davidson...
SKU: 12-0414
Sprocket Shaft Left Side Retainer Cage Sold as a pair Tech Notes: Stock roller set #10-0300 in this cage when installed on a #10-8314 shaft measures 1.4995 on the outside diameter of the roller. Use with #10-0279 race. Must be...
SKU: 10-0427
Sprocket Shaft Spacer *NOTE: Tapered bearing shims for final assembly are available separately. Measurements: Length: .671 inches FITS Harley Davidson FL 1970 Harley Davidson FL 1971 Harley Davidson FL 1972 Harley Davidson FL 1973 Harley Davidson FL 1974 Harley Davidson...
SKU: 10-0948
Sprocket Shaft Spacer Features built in seal flange to give added support for alternator rotor. FITS Harley Davidson FL 1970 Harley Davidson FL 1971 Harley Davidson FL 1972 Harley Davidson FL 1973 Harley Davidson FL 1974 Harley Davidson FL 1975...
SKU: 10-8269
Sprocket Shaft Spacer .336 Sprocket shaft spacer is .336 long and fit between Timken bearing assembly and the motor sprocket and are sealed. This spacer is a special spacer that fits into the engine seal when it is used on...
SKU: 10-8284
Sprocket Shaft Spacer and Seal Kit Kit is a single lip type seal. FITS Harley Davidson FL 1970 Harley Davidson FL 1971 Harley Davidson FL 1972 Harley Davidson FL 1973 Harley Davidson FL 1974 Harley Davidson FL 1975 Harley Davidson...
SKU: 12-0989
Sprocket Shaft Spacer and Seal Kit Sprocket shaft spacer and seal kit includes 2 snap rings 1 spacer and 1 seal. FITS Harley Davidson K 1952 Harley Davidson K 1953 Harley Davidson K 1954 Harley Davidson K 1955 Harley Davidson...
SKU: 12-0990
AVAILABILITY: In stock (3 items)
Sprocket Shaft Spacer and Seal Kit Sprocket shaft include 1 snap ring 1 spacer and 1 seal. FITS Harley Davidson XL 1977 Harley Davidson XL 1978 Harley Davidson XL 1979 Harley Davidson XL 1980 Harley Davidson XL 1981 Harley Davidson...
SKU: 10-0428
Sprocket Shaft Spacer Shim Set Sold as a set of six. FITS Harley Davidson FL 1970 Harley Davidson FL 1971 Harley Davidson FL 1972 Harley Davidson FL 1973 Harley Davidson FL 1974 Harley Davidson FL 1975 Harley Davidson FL 1976...
SKU: 16-0150
Sprocket Shaft Turning Tool This sprocket shaft turning tool fits taper on assembled motor and allows engine to be turned over by 1/2 inch ratchet or impact driver. FITS Harley Davidson EL 1936 Harley Davidson EL 1937 Harley Davidson EL...
SKU: 17-0310
Stainless Steel Forged Kick Starter Arm Order hardware separately. *NOTE: Unbreakable solid stainless steel! Measurements: Length Edge-to-Edge: 9 inches FITS Harley Davidson FL 1954 Harley Davidson FL 1955 Harley Davidson FL 1956 Harley Davidson FL 1957 Harley Davidson FL 1958...
SKU: 11-0625
Stainless Steel Intake Valve Sifton stainless steel intake valve for Shovelhead models. FITS Harley Davidson FL 1966 Harley Davidson FL 1967 Harley Davidson FL 1968 Harley Davidson FL 1969 Harley Davidson FL 1970 Harley Davidson FL 1971 Harley Davidson FL...
SKU: 17-0982
Stainless Steel Kick Starter Arm Kit Requires the use of a 13/32 inch x 11/16 inch x 1/16 inch top washer (OEM #6442) and a 5/16 inch x 11/16 inch x 1/16 inch lower washer (OEM #6320). FITS Harley Davidson...
SKU: 11-1136
Stainless Steel Natural Intake Valve Stainless steel with natural finish intake valve FITS Harley Davidson FL 1981 Harley Davidson FL 1982 Harley Davidson FL 1983 Harley Davidson FL 1984 Harley Davidson Fx 1981 Harley Davidson Fx 1982 Harley Davidson Fx...
SKU: 11-1132
Stainless Steel Nitrate Intake Valve Replica stainless steel nitrate intake valve has a face valve of 1-15/16 inch. FITS Harley Davidson FL 1981 Harley Davidson FL 1982 Harley Davidson FL 1983 Harley Davidson FL 1984 Harley Davidson Fx 1981 Harley...
SKU: 11-9659
Stainless Steel Nitrate Intake Valve Replica stainless steel nitrate intake valve FITS Harley Davidson FL 1948 Harley Davidson FL 1949 Harley Davidson FL 1950 Harley Davidson FL 1951 Harley Davidson FL 1952 Harley Davidson FL 1953 Harley Davidson FL 1954...
SKU: 12-0788
Standard Cam Chest Breather Valve Gear Order 8 piece thrust washer separately. *NOTE: 28.45mm (1.1201 inch) outer diameter. Tech Notes: Suggested to use with #12-1510 Cam Chest Breather Valve Washer Set. FITS Harley Davidson EL 1936 Harley Davidson EL 1937...
SKU: 10-0671
AVAILABILITY: Out of Stock
Standard Hydraulic Tappet Outer diameter measurement is .7310. The larger diameter rollers in these maxi-tappet assemblies increase the dynamic load rating by approximately 20%. Measurements: Needle Diameter: 1.60 mm FITS Harley Davidson FL 1953 Harley Davidson FL 1954 Harley Davidson...
SKU: 10-0670
Standard Hydraulic Tappet Assembly Outer diameter measurement is .7310. The larger diameter roller in these maxi-tappet assemblies increase the dynamic load rating by approximately 20%. Measurements: Needle Diameter: 1.60 mm Tech Notes: Suggested to be used with #11-1074 Solid Tappet...
SKU: 10-0779
Standard Hydraulic Tappet Assembly Sold as a set of 4. Measurements: Outer Diamter: .842 inches FITS Harley Davidson FLST 1986 Harley Davidson FLST 1987 Harley Davidson FLST 1988 Harley Davidson FLST 1989 Harley Davidson FLST 1990 Harley Davidson FLST 1991...
SKU: 10-8277
Standard Hydraulic Tappet Assembly Hydraulic standard tappet assembly include roller assembly installed. Measurements: Diameter: .904 inches FITS Harley Davidson XL 1991 Harley Davidson XL 1992 Harley Davidson XL 1993 Harley Davidson XL 1994 Harley Davidson XL 1995 Harley Davidson XL...
WHAT ARE YOU LOOKING FOR?
Search for "{{ result }}"
Thanks for subscribing!
We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.
Thanks for contacting us. We'll get back to you as soon as possible.
