200 XL Rigid Frame 40 Rake

Frame will accept 1 inch neck cups Wide Glide fork assembly stock length kickstand and pin oil tank and battery box which must be ordered separately. Includes mounts for stock gas tank. Accepts right side drive transmission and is disc brake type. Frame does not have a cross shaft provision for mechanical brakes available separately as required. *NOTE: Suggested to use weld tank mounts to top frame tube. Do not drill frame tube. *NOTE: Top mount extension must be fabricated by builder. Top mount extension not included. Addition tabs and brackets may be required as build progresses. Mounts for sissy bar oil tank battery kickstand and rear fender mounts should be considered in advance before paint and final assembly. Always pre-build first dissemble then the actual final build! **NOTE: Check drain plug location for crack case drain frame cross brace may have to be clearance to allow access to engine drain plug. Use spacers which have 3/4 inch flats to fit plates with 9/16 inch axle hole.
Measurements: Rear Axle Plate Slot: 3/4 inches Wide
Tech Notes: Suggested to use with: #24-0119 or #24-0253 Neck Cup Set #42-9912 Battery Carrier Kit #44-0148 Rear Axle and #44-0545 Axle Adjuster #44-0786 Axle Spacer and #37-0889 Axle Nut Kit #31-0953 Front Top Motor Mount #20-4001 133 Tooth Rear Belt and #20-0512 29 Tooth Pulley #22-0730 Rear Caliper and Disc Kit #27-0509 Kickstand Chrome and #27-1500 Kickstand Pin Kit. Required to use with #51-0389 XL Brake Shaft Tube. *NOTE: UPS may consider this part as packaged inchoversizeinch for shipment as compared to the actual weight Required to use with #51-0389 XL Brake Shaft Tube which will result in higher shipping costs. **NOTE: All frames are shipped to the lower 48 states by common carrier truck please allow extra time for delivery. All other shipments will be made air freight collect. Suggested to use with #44-0763 9/16inch Rear Axle Adapter Spacer Set.
Instructions: http://www.vtwinmfg.com/Instructions/51/51-3525.pdf