Replica UL Smooth Cam Cover *NOTE: The 5 bronze bushings installed may require reaming for each application. Order Screws and gasket separately. **NOTE: The technician must install breather valve V-Twin #49-2562* in hole as shown. The hole must be drilled...

Replica Cast Cam Cover Bushings and breather plate are installed. Cam cover bushings must be checked and fitted (reamed) for final assembly. Check end play as well. Make sure oil passages and oil feed holes in bushings are clear. Tapered...

Replica UL Smooth Cam Cover *NOTE: The 5 bronze bushings installed may require reaming for each application. Order Screws and gasket separately. **NOTE: The technician must install breather valve V-Twin #49-2562* in hole as shown. The hole must be drilled...

Replica Knucklehead Cam Cover Cam cover is exact Replica for 1937-1940 EL models smooth type! Cam cover bushings must be checked and fitted (reamed) for final assembly. Check end play as well. Make sure oil passages and oil feed holes...

Replica Flatside Cam Cover Chrome Cam cover bushings must be checked and fitted (reamed) for final assembly. Check end play as well. Make sure oil passages and oil feed holes in bushings are clear. Tapered screw holes may require a...

WR 45 inch Cam Cover Alloy Has the relocated stud hole for the idler shaft. Cover bushings are standard bushing not for ball bearings. For use with WR magneto drive gear stud installed in right engine case. *NOTE: Order magneto...

45 inch Cam Cover Natural Alloy The generator mount holes are 1/4 inch. *NOTE: Ribbed OE type includes bronze cam bushings installed breather vent generator gear oil control plate also installed. Instructions: http://www.vtwinmfg.com/Instructions/10/10-1946.pdf FITS Harley Davidson G 1937 Harley Davidson...

Factory Sample 4-Finned FL Cast Cam Cover Cam cover bushings must be checked and fitted (reamed) for final assembly. Check end play as well. Make sure oil passages and oil feed holes in bushings are clear. Tapered screw holes may...

Factory Sample Cam Cover Polished Lower mount hole is slotted for 1977-up models. Cover is for electric start models. The top threaded hole measures 5/8 inch X 11. *NOTE: Lower edge has welding marks and pits where cross fit for...

Factory Sample Cam Cover Polished Lower mount hole is slotted. Cover is for electric start models. All cam bushings are installed but may need reaming before final installation. Breather sleeve is installed. *NOTE: Hole is slotted for use on cross...

Cam Cover Bushing for Side Valve Cam cover bushing for Side Valve models. FITS Harley Davidson UL 1937 Harley Davidson UL 1938 Harley Davidson UL 1939 Harley Davidson UL 1940 Harley Davidson UL 1941 Harley Davidson UL 1942 Harley Davidson...

Cam Cover Bushing for Side Valve Cam cover bushing for Side Valve models. Measurements: Flange: .088 inches FITS Harley Davidson G 1937 Harley Davidson G 1938 Harley Davidson G 1939 Harley Davidson G 1940 Harley Davidson G 1941 Harley Davidson...

Cam Cover Bushing for Side Valve Cam cover bushing for Flathead Side Valve models. FITS Harley Davidson G 1937 Harley Davidson G 1938 Harley Davidson G 1939 Harley Davidson G 1940 Harley Davidson G 1941 Harley Davidson G 1942 Harley...

Cam Cover Bushing .005 Oversize Cam cover bushing is .005 oversize. FITS Harley Davidson FL 1941 Harley Davidson FL 1942 Harley Davidson FL 1943 Harley Davidson FL 1944 Harley Davidson FL 1945 Harley Davidson FL 1946 Harley Davidson FL 1947...

Cam Cover Bushing .005 Oversize Cam cover bushing is .005 oversize. FITS Harley Davidson FL 1970 Harley Davidson FL 1971 Harley Davidson FL 1972 Harley Davidson FL 1973 Harley Davidson FL 1974 Harley Davidson FL 1975 Harley Davidson FL 1976...

Cam Cover Bushing .005 Oversize Cam cover bushing is .005 oversize. FITS Harley Davidson FL 1941 Harley Davidson FL 1942 Harley Davidson FL 1943 Harley Davidson FL 1944 Harley Davidson FL 1945 Harley Davidson FL 1946 Harley Davidson FL 1947...

Cam Cover Bushing .005 Oversize **Note:1954-72 FL application will require drilling of oil supply hole in bushing after being pressed into cam cover. FITS Harley Davidson FL 1954 Harley Davidson FL 1955 Harley Davidson FL 1956 Harley Davidson FL 1957...

Cam Cover Bushing .005 Oversize Cam cover bushing is .005 oversize for #1 3 4 cams. Bushing fits Side Valve models. FITS Harley Davidson G 1937 Harley Davidson G 1938 Harley Davidson G 1939 Harley Davidson G 1940 Harley Davidson...

Cam Cover Bushing For #2 Cam .005 Oversize Cam cover bushing for #2 cam. Bushing is .005 oversize for XL models. FITS Harley Davidson XL 1957 Harley Davidson XL 1958 Harley Davidson XL 1959 Harley Davidson XL 1960 Harley Davidson...

Cam Cover Pinion Shaft Bushing .005 Oversize Cam cover pinion shaft bushing .005 oversize. FITS Harley Davidson XL 1957 Harley Davidson XL 1958 Harley Davidson XL 1959 Harley Davidson XL 1960 Harley Davidson XL 1961 Harley Davidson XL 1962 Harley...

Crankcase Breather Kit Support Bracket Crankcase breather support bracket is used with the Sifton air cleaner breather kit FITS Harley Davidson XL 1991 Harley Davidson XL 1992 Harley Davidson XL 1993 Harley Davidson XL 1994 Harley Davidson XL 1995 Harley...

Magneto Cam Cover Housing Cap is cast aluminum with screw on wire caps for a better sealing function. Kit includes early braided copper wire set. Cut wires to desired length. FITS Harley Davidson XL 1959 Harley Davidson XL 1960 Harley...

Crankcase Breather and Bracket Kit Allows the use of CV air cleaners. Order air cleaner separately. Tech Notes: Suggested to be used with #40-0350 breather filter FITS Harley Davidson FLST 1993 Harley Davidson FLST 1994 Harley Davidson FLST 1995 Harley...

Crankcase Breather and Bracket Kit This kit is used on models with cylinder head/crankcase breather systems and includes bracket filter hose and all mounting hardware necessary for installation. Order air cleaner separately. *NOTE: The banjo bolts used for this measure...