Stretch Bobbed 5.5 Gallon Gas Tank Set The inchStretched inch rear section of the tank does hold gas and features seamless stretched portion. Check the tank for flaws and fit before painting. Do not grind or sand the seams or...

Stretch Chopper 3.8 Gallon Gas Tank Center to center measurement of mounting holes are 13-1/4 inch. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank....

Stock Replica Bobbed 5.1 Gallon Gas Tank Tank utilizes right and left bung caps is carburetor type and does not have provisions for installing an OE fuel gauge. It is suggested to pressure test and use a tank sealer. We...

Stock Replica Bobbed 5.1 Gallon Gas Tank EFI type tank does not have provisions for installing an OE fuel gauge. Requires sanding and primer prior to painting. Fuel line fitting should be masked or plugged during painting for easy installation...

Wyatt Gatling Stretch Touring 7.0 Gallon Gas Tank This stretched tank has steel construction with a curved bottom and dash. Includes hardware and rear mounting brackets. The use of the stock tank filler assembly is required. Requires a custom seat...

Stretch 7.0 Gallon Fat Bagger Gas Tank Features curved bottom and dash. Includes hardware and rear mounting brackets. The use of the stock tank filler assembly is required. Requires a custom seat to be fitted and accepts the stock OEM...

WR Half Mile Gas Tank Set Tank includes 2-1/2 gallon per side for gas only. Tank does not have provision for instrument dash panel or fuel shut off rod. Must use remote oil tank! 45 WR tanks use rubber fuel...

WR 45 inch 3 Gallon Gas Tank Set Does not accept reserve fuel shut off rod or instrument dash panel assemblies. Both sides are intended for gas but can be modified to use gas on the left and oil on...

WR 45 inch 2.0 Gallon Gas Tank Set Does not accept reserve fuel shut off rod or instrument dash panel assemblies. Both sides are intended for gas if oil tank is under seat ares but can be refitted to use...

WR 45 inch 2.5 Gallon Gas Tank Set Does not accept reserve fuel shut off rod or instrument dash panel assemblies. Both sides are intended for gas but can be refitted to use gas on the left and oil on...

Tourist Trophy Gas Tank Set with Brackets Top is smooth type without dash base cutout. Use for either 2 side of gas or 1 side oil on the right. The right side has two front 3/8 inch NPT and one...

Stock 5.1 Gallon Gas Tank Check the tank for flaws and fit before painting. The tank requires sanding and primer. Do not grind or sand the seams or joints. The fuel line fitting should be masked or plugged during painting...

Tourist Trophy Gas Tank Set Use for 2 sides of gas. The left side accepts metric nut type petcock. Order hardware separately fittings and plugs not included. *NOTE: The rear mount bar has 5/16 inch x 24 threads which mounts...

Replica XL 2 Gallon Steel Gas Tank Raw Tank accepts 1983-up vented type bayonet style gas cap. Does not include brackets or mounts. *NOTE: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual...

Wyatt Gatling Bobbed 2.3 Gallon Gas Tank Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a...

Wyatt Gatling Bobbed 2.3 Gallon Gas Tank Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a...

Replica XL 2 Gallon Steel Gas Tank Raw Accepts bung style vented gas cap. Mounting bolts and bung style gas cap must be ordered separately. Measures 48cm long 21.5cm wide and tunnel measures 8cm wide. *NOTE: Replaces stock gas tank...

Replica XL 2 Gallon Steel Gas Tank Raw Accepts bung style vented gas cap and 1986-up vented type gas caps. Mounting bolts and bung style gas cap must be ordered separately. Measures 48cm long 21.5cm wide and tunnel measures 8cm...

Replica XL 2 Gallon Steel Gas Tank Raw Accepts bung style vented gas cap and 1986-up vented type gas caps. Mounting bolts and bung style gas cap must be ordered separately. Measures 48cm long 21.5cm wide and tunnel measures 8cm...

Replica XL 2 Gallon Steel Gas Tank Specific to EFI models and also accepts bung style vented gas cap and 1986-up vented type gas caps. Tank includes extension for fuel pump assembly built in. Features a raw steel finish. Mounting...

Replica XL 2 Gallon Steel Gas Tank Raw Accepts bung style vented gas cap. Mounting bolts and bung style gas cap must be ordered separately. Measures 48cm long 21.5cm wide and tunnel measures 8cm wide. *NOTE: Replaces stock gas tank...

Stock Replica Bobbed 5.1 Gallon Gas Tank This EFI type tank has provisions to fit an OE fuel gauge in left hand bung hole. The tank requires sanding and primer before painting. Fuel line fitting should be masked or plugged...

Teardrop Gas Tank Emblem Kit Mount with adhesive to place in desired position then braze in place for permanent placement. FITS Harley Davidson EL 1936 Harley Davidson EL 1937 Harley Davidson EL 1938 Harley Davidson EL 1939 Harley Davidson EL...

Rubber Gas Tank Pad Gas tank rubber knee pad. Tech Notes: Suggested to use with #38-0481 #38-0482 #38-0483 #38-0484 Legacy 3.8 Gallon Gas Tanks.