Porkster 3.2 Gallon Gas Tank Single Cap Tank is dual cap type. This tank is shorter in length than the stock tank. Tank accepts stock components and is for carburetor models. Use with 1975-up petcock and proper hardware for installation...

Replica Roadster Style 3.5 Gallon Gas Tank Requires relocation of the coil. Please test fitment before painting. Tank weld seams may require filler to meet your individual requirements. Do not grind or sand the seams as this may cause leaks....

Replica King 3.2 Gallon Gas Tank Tank is carburetor type and features an updated design shape that rolls the bottom edge under to give flowing lines while still retaining the classic shape. Please test fitment before painting. Tank weld seams...

K-Style 3.5 Gallon Gas Tank Front mount tab holes to rear mount tab holes measure 21-1/4 inch center to center. The fuel opening is 4-1/2 inch from the front edge of the tank and 16 inch from the rear edge....

Replica Sportster 2.4 Gallon Gas Tank High tunnel stock style tank features stock mounts and filler neck. It uses a 1975-up petcock with external thread for nut. *NOTE: Must order hardware separately. Please test fitment before painting. Tank weld seams...

Porkster 3.2 Gallon Gas Tank The tunnel depth front to back is 5 inch to 2-5/8 inch and the distance between the front and rear bolt holes is 23-7/8 inch. Please test fitment before painting. Tank weld seams may require...

Porkster 3.2 Gallon Gas Tank Kit Dual Cap Includes coil/ignition switch kit. Tank features a smooth top. Kit utilizes a 22mm nut type petcock order separately. Please test fitment before painting. Tank weld seams may require filler to meet your...

King 3.1 Gallon Gas Tank King gas tank is made 2 inch wider than stock and includes stock style mounts. Order gas cap separately. Check the tank for flaws and fit before painting. Do not grind or sand the seams...

Porkster 3.2 Gallon Gas Tank Dual Cap The distance between the mounting holes measures 3 inch. This tank does not accept dash panel or speedometer. It uses a late bung style cap set. Order cap set and hardware separately. Please...

Replica Sportster 2 Gallon Gas Tank High tunnel stock style tank features stock mounts and filler neck. It uses a 1955-74 petcock. Please test fitment before painting. Tank weld seams may require filler to meet your individual requirements. Do not...

King 3.1 Gallon Gas Tank Tank is made 2 inch wider than stock and includes stock style mounts. Please test fitment before painting. Tank weld seams may require filler to meet your individual requirements. Do no grind or sand the...

King 3.1 Gallon Gas Tank Tank is made 2 inch wider than stock and includes stock style mounts. Please test fitment before painting. Tank weld seams may require filler to meet your individual requirements. Do not grind or sand the...

Mount Strips for Gas Tank Emblems Raw Steel Mount strips are from the original 1981 V-Twin MFG production and accepts original and after market emblems. Emblem mounts and emblems must be contoured to match tank curve before installation. Order screws...

Gas Tank Emblem Mount Strips Emblem mounts and emblems must be contoured to match tank curve before installation. Width between mount holes measures 6-7/16 inch. FITS Harley Davidson FL 1966 Harley Davidson FL 1967 Harley Davidson FL 1968 Harley Davidson...

King 3.1 Gallon Gas Tank Tank is made 2 inch wider than stock and includes stock style mounts. Order gas cap separately. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints....

King 3.2 Gallon Gas Tank King tank features an updated shape that rolls the bottom edge under to give flowing lines while still retaining the classic shape. Order gas cap separately. Check the tank for flaws or fit before painting....

King 3.2 Gallon Gas Tank King tank features an updated shape that rolls the bottom edge under to give flowing lines while still retaining the classic shape. Tank is carburetor type. Order gas cap separately. Check the tank for flaws...

Fat Bob Gas Tank Set 3.5 Gallon Tank set features handshift mounts and shut off rod provision. Order shut off rod and seat kit separately. Mount strips are welded to each side to attach emblems and stainless trim. Tank emblem...

Koffin Style 2.2 Gallon Gas Tank Use proper hardware for installation process. Please test fitment before painting. Tank weld seams may require filler to meet your individual requirements. Do not grind or sand the seams as this may cause leaks....

Koffin Style 3.4 Gallon Gas Tank *NOTE:Includes 2 black brackets and bolts. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to...

Gas Tank Mounting Kit All tanks or tank sets will require hand fitting to give correct alignment for dash and fuel line fitment. Dash will also have to be shimmed when installed to achieve correct height. FITS Harley Davidson Fx...

Gas Tank Filler Cap Neck Insert Set For use with 1983-up style gas caps.

Gas Tank Mounting Kit Kit includes acorn nuts washers and spacers for mounting gas tanks on 1958-1985 XL models. Measurements: Tunnel Length: FITS Harley Davidson XL 1958 Harley Davidson XL 1959 Harley Davidson XL 1960 Harley Davidson XL 1961 Harley...

Gas Tank Tab Set Four piece tab set for top bottom right and left sides of the tank must be welded on. Measurements: Tunnel Length: FITS Harley Davidson FL 1941 Harley Davidson FL 1942 Harley Davidson FL 1943 Harley Davidson...