Chopper Prism 2.2 Gallon Gas Tank Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank...

4 inch Stretch Image 4.0 Gallon Gas Tank This Wyatt Gatling tank has a 4 inch stretch to the back of the tank which does not affect the mounts. The underside of the tank will accept 1/8 inch National Pipe...

Bobbed 4.0 Gallon Gas Tank Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. it is suggested to pressure test and use a tank sealer....

Bobbed 5.1 Gallon Gas Tank The center to center distance of the front and rear mount is 20 inch. The thread size for the hole next to the petcock hole measures 5/16 inch-24. NOTE: Tank requires sanding and primer prior...

2 inch Stretch 5.5 Gallon Gas Tank Tank requires block off plate for use with carburetor type. Order separately. Requires sanding and primer before painting. The fuel line fitting as well as the petcock fitting should be masked or plugged...

Replica King 3.2 Gallon Gas Tank Tank is carburetor type and features an updated design shape that rolls the bottom edge under to give flowing lines while still retaining the classic shape. Please test fitment before painting. Tank weld seams...

2.4 Gallon Gas Tank This 2.4 gallon gas tank is raised 2 inch in the front with forward cap. This allows more room for wires to be tucked underneath the tank. FITS Harley Davidson XL 2007 Harley Davidson XL 2008...

1966 Fat Bob Gas Tank Set 5.0 Gallon Petcock hole is 3/8 inch NPT to accept male petcock. Tank set is exact replica for 1966 FL. Accepts right and left bayonet cap set. Requires sanding and primer before painting. Petcock...

Bobbed 5.0 Gallon Gas Tank Set Tank set will accept: stock dash stock speedometer and gas caps. Features welded on emblem mounts which are 1/2 inch lower than on replica tanks to accept 1966-72 style emblems. Mounts measure 6-5/8 inch...

Bobbed 5.1 Gallon Gas Tank Check the tank for flaws and fit before painting. Tank requires sanding and primer. Do not grind or sand the seams or joints. The fuel line fitting should be masked or plugged during painting for...

Bobbed 3.5 Gallon Gas Tank Set This flat side tank features a screw type bung. Order caps separately. Petcock fitting should be masked or plugged during painting for easy installation. Carefully check the tank for flaws and fit before painting....

Chopper Axed 3.3 Gallon Gas Tank The tank features center rails and two mount tabs and a 3/8 inch NPT outlet with 2 x 1/4 inch crossover outlets on either side of the rear to allow for multiple choices for...

Bobbed 3.5 Gallon Gas Tank Set Tank accepts stock dash and speedometer and accepts a bayonet type cap. Order cap set and petcock separately. Please test fitment before painting. Tank weld seams may require filler to meet your individual requirements....

Chopper Axed 2.2 Gallon Gas Tank Right side is 3/8 inch NPT female left side is 1/4 inch NPT female for petcocks. Petcock tunnel is 2-1/2 inch wide. Tabs are front and rear undrilled. Check the tank for flaws and...

Chopper Axed 2.2 Gallon Gas Tank Check the tank for flaws and fit before painting. It requires sanding and primer. Do not grind or sand the seams or joints. Check the petcock opening making sure the petcock can be easily...

Chopper Axed 2.2 Gallon Gas Tank The petcock measures 5/8 inch x 18 and the bung on the left side is 1/2 inch x 20. *NOTE: Cap is on right side and uses a screw in JD gas cap available...

Replica King 3.2 Gallon Gas Tank Tank features an updated design shape that rolls the bottom edge under to give flowing lines while still retaining the classic shape. The length from the center font hole mount to the back center...

Replica King 3.2 Gallon Gas Tank Tank is carburetor type and features an updated design shape that rolls the bottom edge under to give flowing lines while still retaining the classic shape. Please test fitment before painting. Tank weld seams...

Replica King 3.2 Gallon Gas Tank Tank features an updated design shape that rolls the bottom edge under to give flowing lines while still retaining the classic shape. Please test fitment before painting. Tank weld seams may require filler to...

Replica King 3.2 Gallon Gas Tank Tank features an updated design shape that rolls the bottom edge under to give flowing lines while still retaining the classic shape. Please test fitment before painting. Tank weld seams may require filler to...

Chopper Peanut Gas Tank It accepts a 1/4 inch National Pipe Thread petcock and a stock style vented cap. Tank fits over 1-1/2 inch frame tube. *NOTE: Features a deep tunnel. Check the tank for flaws and fit before painting....

Fat Bob 3.5 Gallon Gas Tank Set Gas tank set accepts ONE non vented cap and one vented cap. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside...

Fat Bob 3.5 Gallon Gas Tank Set Tank may require fuel rod alignment before installation of shut off assembly. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside...

Bobbed 3.5 Gallon Gas Tank Set Tank accepts stock dash speedometer and cam lock early gas caps. Order cap set separately. Petcock fitting should be masked or plugged during painting for easy installation of petcock. It is suggested to pressure...