MOTION PRO Compression Adjustment Tool 11-0118 Allows for easy adjustments to compression damping without the use of tools, Designed to fit motorcycles '06 to present fitted with KYB AOS/SSS forks, Requires 10 mm handlebar clearance above top of fork cap,...

MOTION PRO Pushrod Tool - Harley-Davidson 08-0744 Flat portion of tool fits under the cylinder head while cupped end fits over the bell in the tube and then compresses the spring allowing for easy access to the spring cap retainer,...

MOTION PRO Fork Cap Tool - Removal/Showa SFF Fork - 50 mm 08-0569 Outer ring fits 50 mm octagonal fork cap and can be clamped in vise to hold fork cap securely while cartridge is being removed, Provides more secure...

MOTION PRO Pin Spanner Tool - Heavy-Duty 08-0673 Designed for removal and installation of shock reservoirs, screw-in seal heads, fork caps, and bearing retainers, Billet heat treated steel construction for increased strength, rigidity and durability, Integrated 3/8" square drive for...

MOTION PRO Tool - Pro/Fork Oil Level 08-0742 Plunger head design features two fluorocarbon elastomer X-Ring seals that provide superior sealing and chemical resistance, Use this tool to check and adjust the oil level on conventional and single chamber cartridge...

MOTION PRO Compression Bolt Removal Tool - WP 4860 MXMA CC Fork 08-0436 Also works for installation and removal of compression unit on RH fork on WP AER 48 mm fork, commonly found on '19-'23 KTM SX/F, XC/F models, Allows...

MOTION PRO Deluxe Piston Pin Puller Tool 08-0472 Works on both full skirt and short skirt (slipper) pistons, Fits all piston pins from 12 mm (1/2") to 24 mm (1"), Non-marring aluminum pin adapters, Interchangeable piston adapters

MOTION PRO Pincher Tool - Side Jaw/Ear Clamp - Stepless? 12-0073 Side jaw design for use where space is restricted, Used to install Stepless? ear clamps

MOTION PRO Valve Stem Seal Tool - Installation - 4 mm 08-0507 Contoured design in bottom of handle cradles and protects the delicate inner lip of the valve stem seal while directing tool force to the sturdy outer rim, Slim...

MOTION PRO Swingarm Bearing Tool 08-0213 Kit includes driver sizes I.D. 20 mm / O.D 26 mm, I.D. 21 mm / O.D. 26 mm and I.D. 22 mm / O.D. 27 mm, Designed for installation of the swingarm bearings on...

MOTION PRO Seal/Bearing Retainer Tool - Honda 08-0227 Precision design prevents damage to the retainer ring after peened stakes have been removed by drilling, To remove and replace the rear wheel bearing/seal retainer ring, part number 41231-429-000 and 41231-286-000, Design...

MOTION PRO Seal/Bearing Retainer Tool - 44 mm - CR 08-0228 Precision design prevents damage to the retainer ring after peened stakes have been removed by drilling, 44 mm, to remove and replace the rear wheel bearing/seal retainer ring, part...

MOTION PRO Fork Cap Tool - Removal 08-0290 The tool is slotted to allow removal and replacement of caps with the P/N 11-0081 Micro Bleeders*, This tool allows removal and replacement of the accessory fork cap, Versatile design features a...

MOTION PRO Pilot Screw Adjustment Tool - 17" 08-0119 Designed for hard-to-reach air/fuel mixture screws with a straight-slot blade tip that can be rotated by rotating the handle, 110? angled head extends reach 1"

MOTION PRO Multi-Purpose Tool 08-0161 Can be used to remove 8, 10, 12, 14 mm bolts, #2 and #3 Phillips screws, small and medium straight-slot screws and 5 and 6 mm Hex bolts, Includes a 1/4" and 3/8" socket driver,...

MOTION PRO Oil Filter Tool - Puler - KTM 08-0400 Conical point screw pierces and grabs the sheet metal end cap on filter, Reduces potential damage to the engine cases, For easy removal of recessed KTM oil filters, Contoured handle...

MOTION PRO Extension Socket Tool - 13/16" 08-0291 Allows the Motion Pro? Ratchet Spark Plug Wrench to be used on recent models where the water neck prevents the use of the wrench alone, Designed to fit in limited space on...

MOTION PRO Hose Removal Tool 08-0646 Facilitates removal of fuel and cooling system hoses, One end is used to loosen stuck hose, the other end assists in pulling the hose off the fitting, Reduces the possibility of damage to hoses...

MOTION PRO Fork Cap Tool - Removal/KYB Fork - 49 mm 08-0531 For removing the fork cap and compression cartridge on twin chamber KYB fork found on late-model Honda, Husqvarna, Kawasaki and Yamaha off-road motorcycles, Provides more secure grip on...

MOTION PRO Accessory - Jumbo Chain Tool 08-0142 This accessory for the jumbo chain tool will safely and properly peens soft-nose-type master link pin tip, Retains that factory quad stake look, Specifically designed for use with part# 08-0135 jumbo chain...

MOTION PRO Replacement Pin - Chain Riveting Tool - 4 mm 08-0061 Replacement pin for use with Motion Pro's chain riveting tool

MOTION PRO Replacement Tip for Chain Rivet Tool 08-0062 Replacement rivet tip, chain tool for use with Motion Pro's chain breaker and riveting tool part# 08-0058 and chain tool part# 08-0467

MOTION PRO Press Tool - Mini/Chain Link 08-0070 Designed to press side plates onto the master link, Fits most 520 - 530 standard and O-ring chains, Hex key wrench is included with tool, Made in the USA

MOTION PRO Screw - Tappet Tool - Oil Filter 08-0339 O-ring design retains the tool in wrench or socket while flange design allows downward force to be applied to tool, Designed for use with 7/16" combination wrench to allow for...