1 inch Flat Track Handlebar with Indents The risers have a center to center measurement of 3-1/2 inch and are 1-1/2 inch tall. *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual...

1 inch Handlebar Riser Set Black Riser set is for use with 1 inch diameter handlebars. Set features a custom short style with black aluminum billet and a contrast cut. Measurements: Rise: 1-1/2 inches

1 inch Handlebar Riser Set Brass Set is cast solid. May have pits and marks from the hand casting process. Measurements: Threads: 1/2 inches -13

1 inch Handlebar Riser Set Polished Riser set is for use with 1 inch diameter handlebars. Set features a custom short style with a polished aluminum billet finish and a contrast cut.

1 inch Handlebar Sleeve Raw Steel 1 inch handlebar sleeve constructed of raw steel slides over the original bar end to eliminate stock internal throttle or spark assemblies FITS Harley Davidson FL 1949 Harley Davidson FL 1950 Harley Davidson FL...

1 inch Pullback Riser Set Chrome Chrome 4-1/2 inch forged aluminum 1 inch pullback riser set with top clamp. Post are 1.10 inch diameter and use with 1/2 inch-13 mounting bolts.

1 inch Retro Pullback Riser Set Brass *NOTE: Risers are sand casted and will have slight imperfections as a result of the casting process. Measurements: Pullback: 1 inches

1 inch Smooth Pullback Riser Set Brass Sand *NOTE: Risers are sand casted and will have slight imperfections as a result of the casting process. Measurements: Inner Diameter: .972 inches

1 inch Super Bar Handlebar with Indents The knurled center to center measures 3-1/4 inch. Measurements: Center Width: 6-3/4 inches Instructions: http://www.vtwinmfg.com/Instructions/MS/handlebars.pdf FITS Harley Davidson FL 1982 Harley Davidson FL 1983 Harley Davidson FL 1984 Harley Davidson FLST 1986 Harley...

1-1/2 inch Rise Super Bar Handlebar without Indents 1 inch chrome handlebar with knurls. Measurements: Center Width: 6-3/4 inches Instructions: http://www.vtwinmfg.com/Instructions/MS/handlebars.pdf FITS Harley Davidson FL 1974 Harley Davidson FL 1975 Harley Davidson FL 1976 Harley Davidson FL 1977 Harley Davidson...

1-1/2 inch Riser Set Chrome Threads measure 1/2 inch x 13. Riser bolts are not included. FITS Harley Davidson FLT 1988 Harley Davidson FLT 1989 Harley Davidson FLT 1990 Harley Davidson FLT 1991 Harley Davidson FLT 1992 Harley Davidson FLT...

1-1/4 inch Beach Bar Handlebar with Indents 1-1/4 inch beach bar is pre drilled for internal wiring. The shape provides comfort with control. Use with stock risers and clamps. Measurements: Center Width: 15 inches Instructions: http://www.vtwinmfg.com/Instructions/MS/handlebars.pdf FITS Harley Davidson FL...

1-1/4 inch Handlebar Riser Adapter Sleeve Spacer Set Black Both sides are knurled for a positive grip installation. Sold in a quantity of 2. *NOTE: For 1 inch handlebars you must order the riser adapter sleeve spacer set separately. Tech...

1-1/4 inch Handlebar Riser Adapter Sleeve Spacer Set Chrome Both sides are knurled for a positive grip installation. Sold in a quantity of 2. *NOTE: For 1 inch handlebars you must order the riser adapter sleeve spacer set separately. Tech...

1-1/8 inch Flanders Style Riser Stems Use tops and bushings from existing Flanders risers. Installation of these riser stems requires tapping of the rear leg tube to 3/4 x 16 for mounting. Requires the use of a 3/4 inch-16 UNF...

1-3/4 inch Riser Set Chrome 1-3/4 inch riser set for 1 inch handlebars on 1988-up FLT models. Tech Notes: Suggested to use #24-1155 caps. FITS Harley Davidson FLT 1988 Harley Davidson FLT 1989 Harley Davidson FLT 1990 Harley Davidson FLT...

10 inch Bagger Ape Style Handlebar Chrome *NOTE: Bars accept twist grips or throttle by wire grips and have tapered ends at grip area for hydraulic clutch applications. For use with batwing style fairings. Measurements: Outer Diameter: 1-1/2 inches FITS...

10 inch Bagger Ape Style Handlebar Chrome *NOTE: Bars accept twist grips or throttle by wire grips and have tapered ends at grip area for hydraulic clutch applications. Measurements: Outer Diameter: 1-1/2 inches FITS Harley Davidson FLTR 2015 Harley Davidson...

10 inch Black Ape Hanger Handlebar with Indents *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in higher shipping costs. Measurements: Center Width: 4-5/16 inches FITS Harley...

10 inch Black Z-Bar Handlebar with Indents *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in higher shipping costs. FITS Harley Davidson FL 1982 Harley Davidson FL...

10 inch Chrome Bathtub Handlebar *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in higher shipping costs. Measurements: Height of Riser: 2 inches Instructions: http://www.vtwinmfg.com/Instructions/25/25-1843.pdf FITS Harley...

10 inch Chrome Curved Riser Handlebar with Indents The distance between the mounting bolt holes measures 3-5/8 inch center-to-center. *NOTE: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result...

10 inch Chrome Z-Bar Handlebar with Indents *Note: UPS may consider this part as packaged inchoversize inch for shipment as compared to the actual weight which will result in higher shipping costs. Measurements: Center to Center: 3-1/2 inches FITS Harley...

10 inch Fatster 'T' Handlebar with Indents This handlebar accepts only GMA handlebar controls with switch housings. Bottom mount spacing width measures 3-1/2 inch center to center. *Note: UPS may consider this part as packaged inchoversize inch for shipment as...