MOTION PRO Tappet Adjuster Tool - 3x8 mm 08-0732 Integrated repositionable wrench handle holds the lock nut while the drivers are used to loosen or tighten the valve adjustment screw, Allows precise valve lash adjustment without disturbing the setting when...

MOTION PRO Fork Cap Tool - Hex - 49 mm 08-0757 Used in the removal and installation of fork caps on Harley Davidson touring models with 49 mm forks, Protective O-ring reduces the risk of damage to the fork caps...

MOTION PRO Fork Compression Valve Tool - Removal 08-0373 For removing the compression valve from cartridge, 19 mm hex drive, 36 mm octagon

MOTION PRO Clip On Alignment Tool 08-0574 Collapsible compact design can be stored in almost any toolbox, Ideal for aftermarket clip on handlebar installation, Adjustable arm allows exact position match, Knurled thumb screw

MOTION PRO Chain Tool - Press/Break/Rivet 08-0470 Indexing letters on movable anvil and body ensures correct tool configuration; simply line up the letter on the anvil to the letter on the body to get the configuration needed, Versatile design will...

MOTION PRO Press Tool - Chain Master Link 08-0675 Works on all 50 series chains and has a maximum master link width of 24.8 mm, Presses on side plates with roller pins up to 5.25 mm (0.207") diameter, Easily presses...

MOTION PRO Spanner - Counter Balancer/Clutch Hub/Removal Tool - Honda 08-0385 Heat treated for strength and durability, Used to remove Honda OEM nut, Durable hot black oxide finish, 20 mm inside diameter, Use with a 3/8" driver, 4 pin spanner...

MOTION PRO Pick Up Tool - Magnetic 08-0652 Protective rubber coating won't scratch aluminum or plastic surfaces, Bendable housing retains its shape to access hard-to-reach areas, Low profile tip fits in tight spaces

MOTION PRO Press Tool - U-Joint/Installation/Removal - Heavy-Duty 08-0438 16 mm, 22 mm and 27 mm adapters fit most ATV and UTV applications, Floating press plate allows the use of a hammer for stubborn joints, 16 mm and 20 mm...

MOTION PRO Steering Race Tool - Removal/Installation - Harley-Davidson 08-0633 2-in-1 design quickly and precisely remove and install outer bearing race from the steering head without the use of a hammer and punch, Puller design ensures bearing is pulled perfectly...

MOTION PRO Tappet Adjuster Tool - 4x10 mm 08-0734 Integrated repositionable wrench handle holds the lock nut while the drivers are used to loosen or tighten the valve adjustment screw, Allows precise valve lash adjustment without disturbing the setting when...

MOTION PRO Compression Adjustment Tool 11-0118 Allows for easy adjustments to compression damping without the use of tools, Designed to fit motorcycles '06 to present fitted with KYB AOS/SSS forks, Requires 10 mm handlebar clearance above top of fork cap,...

MOTION PRO Pushrod Tool - Harley-Davidson 08-0744 Flat portion of tool fits under the cylinder head while cupped end fits over the bell in the tube and then compresses the spring allowing for easy access to the spring cap retainer,...

MOTION PRO Fork Cap Tool - Removal/Showa SFF Fork - 50 mm 08-0569 Outer ring fits 50 mm octagonal fork cap and can be clamped in vise to hold fork cap securely while cartridge is being removed, Provides more secure...

MOTION PRO Pin Spanner Tool - Heavy-Duty 08-0673 Designed for removal and installation of shock reservoirs, screw-in seal heads, fork caps, and bearing retainers, Billet heat treated steel construction for increased strength, rigidity and durability, Integrated 3/8" square drive for...

MOTION PRO Tool - Pro/Fork Oil Level 08-0742 Plunger head design features two fluorocarbon elastomer X-Ring seals that provide superior sealing and chemical resistance, Use this tool to check and adjust the oil level on conventional and single chamber cartridge...

MOTION PRO Compression Bolt Removal Tool - WP 4860 MXMA CC Fork 08-0436 Also works for installation and removal of compression unit on RH fork on WP AER 48 mm fork, commonly found on '19-'23 KTM SX/F, XC/F models, Allows...

MOTION PRO Deluxe Piston Pin Puller Tool 08-0472 Works on both full skirt and short skirt (slipper) pistons, Fits all piston pins from 12 mm (1/2") to 24 mm (1"), Non-marring aluminum pin adapters, Interchangeable piston adapters

MOTION PRO Pincher Tool - Side Jaw/Ear Clamp - Stepless? 12-0073 Side jaw design for use where space is restricted, Used to install Stepless? ear clamps

MOTION PRO Valve Stem Seal Tool - Installation - 4 mm 08-0507 Contoured design in bottom of handle cradles and protects the delicate inner lip of the valve stem seal while directing tool force to the sturdy outer rim, Slim...

MOTION PRO Swingarm Bearing Tool 08-0213 Kit includes driver sizes I.D. 20 mm / O.D 26 mm, I.D. 21 mm / O.D. 26 mm and I.D. 22 mm / O.D. 27 mm, Designed for installation of the swingarm bearings on...

MOTION PRO Seal/Bearing Retainer Tool - Honda 08-0227 Precision design prevents damage to the retainer ring after peened stakes have been removed by drilling, To remove and replace the rear wheel bearing/seal retainer ring, part number 41231-429-000 and 41231-286-000, Design...

MOTION PRO Seal/Bearing Retainer Tool - 44 mm - CR 08-0228 Precision design prevents damage to the retainer ring after peened stakes have been removed by drilling, 44 mm, to remove and replace the rear wheel bearing/seal retainer ring, part...

MOTION PRO Fork Cap Tool - Removal 08-0290 The tool is slotted to allow removal and replacement of caps with the P/N 11-0081 Micro Bleeders*, This tool allows removal and replacement of the accessory fork cap, Versatile design features a...