MOTION PRO Pilot Screw Adjustment Tool - 17" 08-0119 Designed for hard-to-reach air/fuel mixture screws with a straight-slot blade tip that can be rotated by rotating the handle, 110? angled head extends reach 1"

MOTION PRO Multi-Purpose Tool 08-0161 Can be used to remove 8, 10, 12, 14 mm bolts, #2 and #3 Phillips screws, small and medium straight-slot screws and 5 and 6 mm Hex bolts, Includes a 1/4" and 3/8" socket driver,...

MOTION PRO Oil Filter Tool - Puler - KTM 08-0400 Conical point screw pierces and grabs the sheet metal end cap on filter, Reduces potential damage to the engine cases, For easy removal of recessed KTM oil filters, Contoured handle...

MOTION PRO Extension Socket Tool - 13/16" 08-0291 Allows the Motion Pro? Ratchet Spark Plug Wrench to be used on recent models where the water neck prevents the use of the wrench alone, Designed to fit in limited space on...

MOTION PRO Hose Removal Tool 08-0646 Facilitates removal of fuel and cooling system hoses, One end is used to loosen stuck hose, the other end assists in pulling the hose off the fitting, Reduces the possibility of damage to hoses...

MOTION PRO Fork Cap Tool - Removal/KYB Fork - 49 mm 08-0531 For removing the fork cap and compression cartridge on twin chamber KYB fork found on late-model Honda, Husqvarna, Kawasaki and Yamaha off-road motorcycles, Provides more secure grip on...

MOTION PRO Accessory - Jumbo Chain Tool 08-0142 This accessory for the jumbo chain tool will safely and properly peens soft-nose-type master link pin tip, Retains that factory quad stake look, Specifically designed for use with part# 08-0135 jumbo chain...

MOTION PRO Replacement Pin - Chain Riveting Tool - 4 mm 08-0061 Replacement pin for use with Motion Pro's chain riveting tool

MOTION PRO Replacement Tip for Chain Rivet Tool 08-0062 Replacement rivet tip, chain tool for use with Motion Pro's chain breaker and riveting tool part# 08-0058 and chain tool part# 08-0467

MOTION PRO Press Tool - Mini/Chain Link 08-0070 Designed to press side plates onto the master link, Fits most 520 - 530 standard and O-ring chains, Hex key wrench is included with tool, Made in the USA

MOTION PRO Screw - Tappet Tool - Oil Filter 08-0339 O-ring design retains the tool in wrench or socket while flange design allows downward force to be applied to tool, Designed for use with 7/16" combination wrench to allow for...

MOTION PRO Adapter Tool Kit 08-0249 Adapter kit does not allow two stroke timing kit to be installed on Yamaha RD two stroke twins when the engine is in the frame but does allow adapter kit with two stroke timing...

MOTION PRO Hex Bit Tool - 3 mm x 4 mm 08-0382 Fits in Motion Pro? Deep Socket and T-Handle Wrench, Rubber O-ring will keep bit securely in place

MOTION PRO Seal/Bearing Retainer Tool - 47 mm - CR 08-0256 To remove and replace the rear wheel bearing / seal retainer rings, part numbers 41231-KZ4-J20 and 41231-KS6-700, Precision design prevents damage to the retainer ring after peened stakes have...

MOTION PRO Replacement Break Pin - Jumbo Chain Tool 08-0D35 Heat treated and hardened for maximum strength and durability, Replacement pin for the Jumbo Chain Tool?

MOTION PRO Chain Tool - Break/Press/Rivet - Compact 08-0467 Complete chain tool for most 520, 525 and 530 standard, O-ring and X-ring chains, Hardened body, riveting tip and breaker pin for strength and durability, Perfect for your tool pack if...

MOTION PRO Chain Tool - Sprocket Jammer* 08-0642 Prevents rotation of chain and sprockets for easy removal or installation of countershaft nut, Can be used to pull rear wheel against chain blocks when tightening rear axle, CNC billet aluminum construction,...

MOTION PRO Chain Slack Tool - SlackSetter Pro* 08-0674 Two scales measure both chain slack and chain to swingarm clearance in millimeters, Works on most street and dirt bike applications up to 75 mm chain slack, Lightweight compact design fits...

MOTION PRO Chain Tool - Trail Task* 08-0741 Versatile, light and super compact chain tool for adventure touring and long distance trail riding, Will break 520, 525, and most 530 chains and master links (maximum link width of 20 mm),...

MOTION PRO Tool Cable Luber V3 08-0609 Works on most control cables with 4 mm to 8 mm outside diameter housing, Original design that seals completely around the cable housing, Makes it easy to clean and lubricate control cables, Less...

MOTION PRO Tool - U-Joint/Clip Installer 08-0696 Designed to install inner circlips on UTV and small vehicle U-Joints, Magnet holds clips securely in place during installation, V blade works with virtually all UTV U-Joints, Ultra-thin profile for easy clip installation,...

MOTION PRO Tool - Bearing Separator/U-Joint/Disassembly 08-0663 Designed to press bearing cups out without damage to the bearings or the yoke, Compact design allows U-Joints to be disassembled on the vehicle, Fully adjustable arms will fit most UTV and ATV...

MOTION PRO Tuff Hook* Tool 08-0664 Flexing shaft is ideal for hard to reach springs with minimal working space, Multi-function tip easily pulls or pushes large springs on and off mounts, Locking shaft slider allows the center of the shaft...

MOTION PRO Bearing Removal Tool - Wheel - 25 mm 08-0267 Heat treated for durability and long service life