MOTION PRO Float Bowl Tool - 17 mm 08-0366 Can also be used as a high-speed compression adjustment wrench for most Showa, KYB, and WP rear shocks, Designed to remove 17 mm float bowl drain plugs and can be carried...

MOTION PRO Holding Tool - Clutch - Heavy-Duty 08-0743 Reversible blades work on conventional square spline and on round spline style clutch hubs, Extended knurled handle provides sure grip when removing or torquing the clutch hub nut, Can be used...

MOTION PRO Replacement Pin - Chain Riveting Tool - 2 mm 08-0059 Replacement pin for use with Motion Pro's chain riveting tool

MOTION PRO Replacement Pin - Chain Riveting Tool - 3 mm 08-0060 Replacement pin for use with Motion Pro's chain riveting tool

MOTION PRO Valve Shim Tool - Valve Adjuster - Suzuki 08-0017 Holds valve spring bucket down so adjusting shims can be removed, For adjusting valve clearance on twin cam models, Manufactured from hardened alloy steel

MOTION PRO Carb Tool - Adjuster - Keihin FCR 08-0181 Includes 6 mm hex for main jets, long-reach straight slot for pilot jets and a 3 mm hex for removing the float bowl, Contains longer bits for reaching into recessed...

MOTION PRO Holding Tool - Clutch 08-0008 Holds clutch hubs, flywheels, gears, sprockets, etc., Recommended for square tooth-style clutch hubs, Features 8 mm spanner pins, Jaws open up to 5" wide, Will not work on clutch baskets with reversed inner...

MOTION PRO Chain Alignment Tool 08-0048 Tool body clamps squarely to rear sprocket so the alignment rod will indicate sprocket alignment to chain, Quick and accurate alignment, Made in the USA

MOTION PRO Fork Spring Tool - Springer/Front Fork - Harley Davidson 08-0144 Assists in the disassembly and assembly of springer-type front forks on Harley-Davidson motorcycles, Made in the USA

TECMATE Drag Specialties Battery Charger - Optimate 2 Duo TM-563 Charges and delivers long term maintenance automatically, Automatically adapts to the connected battery type, Safe to leave connected, full electronic protection, Maintains battery at full charge and good health, Weatherproof,...

TECMATE Battery Charger/Maintainer TM409 Maintains any type of 12 V lead acid or 12.8 V lithium battery from 2 Ah - 20 Ah, Four-step program, Low-volt start of 4 V, Delivers a constant 600mA current, Dust proof plug-in case, with...

MOOSE OFFROAD Chain Breaker Tool - Bicycle V15-6004 Designed to work with most bicycle chains for pressing out the links to lengthen or shorten your bicycle to fit multiple cassette configurations, Helps in retracting pin guide supports and guides chain...

MOOSE OFFROAD Chain Breaker/Rivet Tool - Kit NC-6038 Kit includes 2, 3, 4 mm pins to fit most chains, press plates and all necessary riveting pieces, Break or rivet chains ranging from #35 to #530., Comes in a durable plastic...

MOTION PRO Tool - Chain Breaker/Chain Riveting 08-0058 Versatile enough to be used on drive chains and some cam chains, Includes three pin sizes to fit most chains (2 mm, 3 mm, 4 mm), Investment-cast, hardened body and redesigned body...

MOTION PRO Chain Breaker with Folding Handle 08-0001 Durable drive pin is heat treated for strength and wear resistance, Will push link pin completely through link/side plate, Max pin extension to drive out chain links is 18 mm, Handle folds...

MOTION PRO T-Handle Tool - Mini-Pro - Compact - 6 mm 08-0401 Compact size for easy access and easy transport, Chrome-vanadium tool steel shaft, Lifetime limited warranty, 6-3/4" shaft length, 6 mm drive

MOTION PRO Rack for T-Handle Tools 08-0114 One-piece design holds up to eleven T-handle tools, Easily hangs on the side of most tool boxes, Keeps T-handles accessible and ready, Precision cut steel construction, Made in the USA

MOTION PRO Driver - T-Handle - Mini - Socket - 1/4" 08-0389 Use T-Handle drive to tighten/loosen fasteners and shaft drive for quick installation/removal of fasteners, Use with 1/4" drive sockets, allen drive bits, crow's foot, swivels, etc., Compact size...

MOTION PRO T-Handle - Ball Point - Hex - 6 mm 08-0376 Use T-handle hex to tighten/loosen fasteners on shaft for quick installation/removal of fasteners, Ball end allows for better access to hard-to-reach Allen-head bolts (up to 25? working angle)...

MOTION PRO Wrench - T-Handle - 12 mm 08-0095 Hex socket extends only part of the way inside, allowing the nut to be held in the socket, Slim outside diameter allows sockets to fit in tight areas, Great for shop...

MOTION PRO Wrench - T-Handle - 17 mm 08-0098 Hex socket extends only part of the way inside, allowing the nut to be held in the socket, Slim outside diameter allows sockets to fit in tight areas, Great for shop...

MOTION PRO T-Handle - 3/8" Drive 08-0159 Use any 1/4" or 3/8" drive attachments such as sockets, hex drives, crow's foot or swivels

MOTION PRO Wall Bracket for T-Handle Rack 08-0435 For mounting Motion Pro's T-handle rack to the side of a toolbox, wall, post or any other flat surface, Features a quick release pin for removing and attaching the rack, Made from...

MOTION PRO T-Handle Tool - Allen - Set - 4-8 mm 08-0383 Four piece set, Use T-Handle hex to tighten/loosen fasteners on shaft for quick installation/removal of fasteners, Ball end allows for better access to hard to reach socket head...